Heat flux
Hello!
Please, help me! How to set heat flux in Star-CD? Please write if you have any ideas. |
rdef,2,wall,standard
noslip,rough,0.001,0,8.5,0,1 0,0,0,1,0 flux,0 |
Thanks Pauli!
Now I need to set heat flux in [W/m3] or loads in [W]. Please write if you have any ideas. |
RTM
3. Flux — (constant) wall heat flux value [W/m2] |
There is a 3D model in which through a solid heat flux is passed. A body unevenly cools down a liquid, that condition uneven heat flux from all surfaces. I must count up distributing of temperatures in models and wall heat flux coefficient. For this purpose it is necessary to set a by volume heat flux for a solid [Вт/м3].
Help please, what method it is possible by to set him? Found only how to set a superficial thermal stream [Вт/м2], but for set the problem he will not give a necessary result. Please write if you have any ideas. If something is needed to specify, ask, I will tell. |
Sounds like you want to specify a volume source. If so, you can use the command rsource or the user subroutine sorent.
|
All times are GMT -4. The time now is 23:25. |