CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CD

Scalar polynomial for specific heat is not defined!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 20, 2009, 22:55
Angry Scalar polynomial for specific heat is not defined!
  #1
New Member
 
navid
Join Date: Sep 2009
Posts: 2
Rep Power: 0
navid is on a distinguished road
My case is about investigating injection and combustion of a diesel fuel (n-dodecane) in a chamber. Actually prostar dose not let me save the specific heat as a polynomial function for AIR . I select N2 specification for air.
When I click apply, a message appear in the command output window which says,
'YOU MUST USE THE POPCP COMMAND TO DEFINE THE COEFFICIENTS OF THE POLYNOMIAL.
IF SCALAR DATA IS PRESENT, YOU MUST USE THE POSCP COMMAND TO DEFINE THE SCALAR COEFFICIENTS'.


when I try to save the problem an error appears on the screen which says "Scalar polynomial for specific heat is not defined"! just when I select a constant specific heat for air, software let me write the problem

How should I define spesific heat for air as a a polynomial in my problem using POPCP or POSCP orv other commands?
navid is offline   Reply With Quote

Old   April 16, 2010, 07:00
Question same problem
  #2
Member
 
Heintz Simon
Join Date: Sep 2009
Location: Germany
Posts: 36
Rep Power: 16
sheintz is on a distinguished road
Send a message via MSN to sheintz Send a message via Skype™ to sheintz
Hello
Have you found a solution to this problem ?
I have actualy the same problem.
Thank you in advance
Best regards
sheintz is offline   Reply With Quote

Old   April 19, 2010, 06:00
Default the solution
  #3
Member
 
Heintz Simon
Join Date: Sep 2009
Location: Germany
Posts: 36
Rep Power: 16
sheintz is on a distinguished road
Send a message via MSN to sheintz Send a message via Skype™ to sheintz
hello navid,
i have found the solution of our problem :
we have parameterd polynomial model for the viscosity, the specefic heat and the conductivity of the air, who is a gas and the boundary condition. Also now we have to specify the FuelGas properties too in polynomial model in the panel Thermo Mod and Prop > Additional Scalars > Moleculars Prop !
Have fun
Best Regards
Simon
sheintz is offline   Reply With Quote

Reply

Tags
polynomial, popcp, poscp, specific heat, star cd

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF to modify the value of a user defined scalar Raja Banerjee Fluent UDF and Scheme Programming 5 March 5, 2019 15:19
User defined scalar boundary condition Philip FLUENT 1 December 4, 2013 11:23
How can I increase Heat Transfer at Domain Interf? B.Simon CFX 3 October 28, 2008 19:53
need help for using user defined heat exchanger sinha FLUENT 2 August 6, 2007 18:16
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 03:54.