Parametric Simulations in STAR-CD

SMM · June 15, 2011, 03:13

Hi All,

Is there any way (like parametric solver facility in COMSOL) through which we can generate solution from the result of one single simulation for new values of a particular design parameter.

Thanks

vishyaroon · September 8, 2011, 09:31

Sorry about the late response to this older post.

Do you use STAR CCM+? STAR CCM+ can be easily tuned to run several parametric studies, using macros that can be recorded. This is more user-friendly than STAR CD for parametric studies.

vishyaroon · September 8, 2011, 10:37

Sorry about the late response to this older post.

Do you use STAR CCM+? STAR CCM+ can be easily tuned to run several parametric studies, using macros that can be recorded. This is more user-friendly than STAR CD for parametric studies.

June 15, 2011, 03:13	Parametric Simulations in STAR-CD	#1
SMM New Member Syed Murtuza Mehdi Join Date: Apr 2011 Posts: 19 Rep Power: 3	Hi All, Is there any way (like parametric solver facility in COMSOL) through which we can generate solution from the result of one single simulation for new values of a particular design parameter. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using starToFoam	clo	OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...	28	December 12, 2011 05:13
StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38
error in star ccm	maurizio	CD-adapco	3	October 16, 2007 05:17
Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...	2	July 15, 2005 04:15
URANS and Transient Simulations	bob	Main CFD Forum	0	October 1, 2003 03:54

September 8, 2011, 09:31		#2
vishyaroon Senior Member Aroon Join Date: Apr 2009 Location: Racine WI Posts: 148 Rep Power: 5	Sorry about the late response to this older post. Do you use STAR CCM+? STAR CCM+ can be easily tuned to run several parametric studies, using macros that can be recorded. This is more user-friendly than STAR CD for parametric studies.

September 8, 2011, 10:37		#3
vishyaroon Senior Member Aroon Join Date: Apr 2009 Location: Racine WI Posts: 148 Rep Power: 5	Sorry about the late response to this older post. Do you use STAR CCM+? STAR CCM+ can be easily tuned to run several parametric studies, using macros that can be recorded. This is more user-friendly than STAR CD for parametric studies.