CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CD (http://www.cfd-online.com/Forums/star-cd/)
-   -   About the fiel"es-ice.pos" (http://www.cfd-online.com/Forums/star-cd/94132-about-fiel-es-ice-pos.html)

skylent November 7, 2011 03:20

About the fiel"es-ice.pos"
 
Hi everyone,
I use es-ice to generate the moving mesh, and use star-contorls to set the parameters.
I want to know why sometimes the program can not generate the file "es-ice.pos" during calculation.
When I do the example of the es-ice tutorial, it works okay, and it can output the "es-ice.pos"file. But when I do my work, it cannot output this file. I use ECFM-3Z model, and select methan(CH4) for the fuel...

Is it resulting from the change of fuel? please help me...

entcrmlc May 23, 2012 02:36

es-ice.pos
 
yes,i also meet the same problem and do not know how to solve it. Have you found the method to solve this problem??

skylent May 24, 2012 01:41

Locate the "Analysis Output"panel /"Post page/"Additional output Data" group, and make sure that the "User Subroutine" item is actived.

I think, ice uses "posdat.f" subroutine to output the postprocessing data and write them in "es-ice.pos" file. Hope it works.

----------------------------------------------------------------------

Quote:

Originally Posted by entcrmlc (Post 362591)
yes,i also meet the same problem and do not know how to solve it. Have you found the method to solve this problem??


entcrmlc May 24, 2012 05:28

Tannk you for your help
 
Yes,it can solve the problem.Thank you very much !!skylent
You will be thanked in My thesis thank.
And i wish to Exchange the learning experience with you more.Good friend.:)


All times are GMT -4. The time now is 15:23.