STAR-CD

Read this first: How to ask a question on the forums

Page 8 of 10

Threads in Forum : STAR-CD

Rating Thread / Thread Starter	Last Post	Replies	Views
MRF model in Star CD asishkg	February 25, 2010 23:37 by asishkg	2	2,893
Rotating mesh using newxyz.f Kev	February 7, 2010 07:37 by Kev	2	2,548
Heat flux Dastish	February 3, 2010 11:36 by Pauli	5	2,014
Wall shear stress distributions en51nm	January 28, 2010 04:42 by en51nm	2	3,977
STARCD and GridEngine olesen	January 27, 2010 03:25 by olesen	0	1,578
How:Setting for High pressure gas shiwencailx	January 19, 2010 04:25 by shiwencailx	0	1,797
Error for inputing mesh file from ICEM CFD to StarCD chriszhou	January 15, 2010 03:12 by wmsyahid	10	3,729
finding drag coefficient in laminar flow ksatpathy	January 14, 2010 10:43 by moleroaj	3	4,423
Scalar Plotting sdwijeya	December 30, 2009 18:25 by Pauli	1	1,785
starcd 4.08 bilals	December 23, 2009 07:28 by jaswanth	3	2,342
Postprocessing bilals	December 21, 2009 18:08 by bilals	0	2,096
users of FSI DCI radiatn	December 9, 2009 04:37 by psutton	3	2,014
Convergence Issue... wilson.jiang	November 23, 2009 22:00 by wilson.jiang	0	2,171
gas absorber and stripper labinansan	November 17, 2009 04:10 by labinansan	0	2,098
NaN when restart parallel radiatn	November 10, 2009 05:16 by radiatn	0	1,939
velocity-dependent diffusivity porterma	November 5, 2009 14:03 by Pauli	3	2,353
sormon.f usage for fixing a constant velocity for defined cellset Tilak	November 1, 2009 07:06 by Tilak	0	2,280
Problem with restart henryss	October 25, 2009 07:29 by manishgarg21	2	2,650
Scalar mass conc Result which is larger than 1.0?? shiwencailx	October 24, 2009 03:37 by shiwencailx	0	1,881
STARCD - inlet boundaries definition in combustion problem Paolo	October 23, 2009 12:00 by Paolo	8	2,472
secondary breakup model mepgzzi	October 22, 2009 01:43 by mepgzzi	0	2,019
STARCD: combustion problem involving multi-component mixing Paolo	October 19, 2009 11:54 by Paolo	0	2,159
user defined turbulence model manuutin	October 14, 2009 05:29 by A_Lyaskin	5	4,071
Total-Pressure loses pioneersteffen	October 9, 2009 05:05 by Maddin	10	3,474
duplicated henryss	October 1, 2009 03:36 by henryss	0	1,746
Manipulating Tolerances in "eoslide" command sdwijeya	September 30, 2009 17:59 by sdwijeya	0	1,650
analysis error eleazar	September 30, 2009 17:03 by eleazar	1	2,395
Data Output in Star-CD petyr	September 29, 2009 20:25 by petyr	2	2,445
Memory/ swap area J-man	September 29, 2009 19:43 by TMG	1	2,442
unable to see the boundaries in the STAR CD smkhan	September 29, 2009 19:38 by TMG	1	1,983
flow switch ashishmgad	September 25, 2009 08:16 by A_Lyaskin	1	2,308
stoichiometric coefficient navid	September 22, 2009 02:58 by navid	0	3,862
Template Generation Problem en51nm	September 17, 2009 08:14 by en51nm	0	2,442
Problem with STAR v4 & initfi.f Pauli	September 16, 2009 12:36 by Pauli	0	1,840
importing mesh from Gridgen to STAR CD smkhan	September 15, 2009 08:45 by jchawner	6	2,979
Wall - Cell & Wall data 3rdEYE	September 15, 2009 02:47 by 3rdEYE	0	2,043
Combustion problem in STAR CD... help me, please! mrkokoko	September 14, 2009 17:00 by cfdvenkatesh	1	2,359
Star CD pressure boundary (table editor) hamoudi	September 3, 2009 12:27 by Pauli	3	2,849
Fluid Regions donot communicate via "Attach" Boundaries sdwijeya	August 28, 2009 13:26 by sdwijeya	0	1,804
Source term from droplet evaporation erikrijk	August 28, 2009 11:07 by Pauli	1	2,331

Read this first: How to ask a question on the forums

Page 8 of 10

« First

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 17:23.