CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Structural Mechanics (http://www.cfd-online.com/Forums/structural-mechanics/)
-   -   Static structural Analysis using temperature profile from CFX transient solution (http://www.cfd-online.com/Forums/structural-mechanics/119906-static-structural-analysis-using-temperature-profile-cfx-transient-solution.html)

bhavik139 June 26, 2013 20:36

Static structural Analysis using temperature profile from CFX transient solution
 
Hello Everyone,
I did transient thermal solution using Ansys CFX module , now I want to perform static structural using the final temperature . i want to input the results of the CFX as thermal loading for Static structural. Moreover I want to do a transient structural analysis so looking for some help regarding the problem .

ace37 June 26, 2013 21:42

This isn't a good answer, but an older colleague of mine had a frustrating time getting CFX working for a low-criticality FSI application. He ended up just taking a contour plot and manually applying loads to the structure. That often won't be easy or accurate enough, but it was pretty straightforward and worked well enough in his case.

bhavik139 June 28, 2013 00:24

Thanks Ace, But can anyone give me a more clear solution.

albin91 July 7, 2013 21:51

confused
 
Hello everyone .. i want to ask ,, what is in mechanical workbench ,, output thermal exapansion or thermal stress ,, please answe


All times are GMT -4. The time now is 03:12.