 |
 |
 |
|
|
|
[Sponsors] | ||||
May 17, 2014, 07:48
|
Applying Temprature Gradient
|
#1 |
|
New Member
Mujeeb Niazi Fankar
Join Date: May 2014
Posts: 1
Rep Power: 0  |
Can any one please tell me about applying the temprature difference along a beam Cross section for example beam has top surface temprature equal to 100 Degree Celsius and Bottom Temprature is 20 Degrees.
I have applied this on Steady State Thermal Stand-alone. but also want to apply some pressure on top surface which need to be solved in Static Structrual So My question can be summarized as HOW TO APPLY THERMAL GRADIENT ACROSS BEAM CROSS SECTION IN STATIC STRUCTURAL MODEL? |
|
|
|
|
 |
| Tags |
| thermal gradient |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WSS and normal velocity gradient for the slanted pipe | wanna88 | FLUENT | 2 | October 1, 2012 22:34 |
| vortex cause pressure gradient or pressure gradient induce vortex? | fruitkiwi | Main CFD Forum | 4 | June 12, 2012 01:12 |
| Pressure Gradient in channelOodles | sega | OpenFOAM Running, Solving & CFD | 14 | August 12, 2009 06:21 |
| Applying temperature gradient | Wiggy | FLUENT | 0 | July 14, 2009 12:20 |
| How to compute gradient for non-orthogonal grids? | Paul Hsieh | Main CFD Forum | 3 | November 11, 2003 04:52 |
Linear Mode
