CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Structural Mechanics

ansys apdl basic error please solve

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 20, 2016, 14:07
Smile ansys apdl basic error please solve
  #1
New Member
 
Vishnu
Join Date: Apr 2015
Posts: 2
Rep Power: 0
V!$hnU is on a distinguished road
I am trying to analyse a two material cylinder glued together .The cylinder is subjected to internal pressure of 100 units. The problem i am facing is that the radial stress at the inner radius (where the internal pressure is applied) is not equal to the internal pressure.I.E. if the internal pressure is 100 units ,the radial stress at the inner radius is 98.23. It generally deviates by 2 to 3 percent.I am attaching a contour plot of the radial stress.
I have used the following properties;
young's modulus E1=1e5......E2=2e5
Poisson's ratio is 0.3 for both materials
Mesh properties: smart size no:1(fine)
free mesh
plane 182 has been used. It is a cylinder with zero height hence area has been defined.Only quarter cylinder is analysed and symmetric boundary condition has been implemented.
To find radial stress, rsys,1 command has been used
Attached Images
File Type: png error1.PNG (23.8 KB, 5 views)
V!$hnU is offline   Reply With Quote

Reply

Tags
error composite cylinder

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ansys Mechanical APDL, Salam-H Main CFD Forum 0 October 6, 2015 20:48
ansys mechanical apdl 15 error polniox ANSYS 0 November 19, 2014 07:10
[ANSYS Meshing] Meshing sphere in Ansys APDL kerengge ANSYS Meshing & Geometry 4 October 15, 2014 22:19
Usage of element INTER 203 in ANSYS APDL rohit.jain092 ANSYS 0 May 1, 2013 03:05
how can I solve this exercise with ANSYS ehsan88 ANSYS 1 February 7, 2010 14:24


All times are GMT -4. The time now is 09:35.