CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   SU2 Shape Design (http://www.cfd-online.com/Forums/su2-shape-design/)
-   -   Could SU2_V2.0.2 work properly with continuous_adjoint.py script in parallel mode? (http://www.cfd-online.com/Forums/su2-shape-design/116081-could-su2_v2-0-2-work-properly-continuous_adjoint-py-script-parallel-mode.html)

Tommy Chen April 12, 2013 11:27

Could SU2_V2.0.2 work properly with continuous_adjoint.py script in parallel mode?
 
I have tried a 2-D simulation with countinuous solver (RANS)
it works OK in serial mode, however it doesn't work well in the parallel mode.

The .cfg and .su2 are the cases in the SU2_V2.0 testcases/rans/rae2822

fpalacios April 18, 2013 13:06

Quote:

Originally Posted by Tommy Chen (Post 420163)
I have tried a 2-D simulation with countinuous solver (RANS)
it works OK in serial mode, however it doesn't work well in the parallel mode.

The .cfg and .su2 are the cases in the SU2_V2.0 testcases/rans/rae2822

Hi Tommy,

I think that your problem should be related with the grid deformation capability in parallel. You are probably using 2D torsional springs which only works in serial, we have fixed that issue in the new developers version 2.0.3 that will be released today.

Best,
Francisco


All times are GMT -4. The time now is 12:11.