CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   SU2 Shape Design (http://www.cfd-online.com/Forums/su2-shape-design/)
-   -   CGNS model (http://www.cfd-online.com/Forums/su2-shape-design/121949-cgns-model.html)

Tushar K Herle August 8, 2013 12:44

CGNS model
 
Hi,
I have modeled a wing and i meshed it with the help of hypermesh11. I got the .cgns file of the wing but when i tried to run it using oneram6 cfg code(conversion from cgns to su2 is mentioned in the cfg code) it is showing "unrecognised element type".
I think i missed to mention something either in .cgns file or in .cfg file. Please help me out with this. It will be really helpful if anyone can tell me what nd all should be mentioned in .cgns file and how the model should be. Is there any particular method that i should follow??

Akash C August 10, 2013 01:23

Go through the su2 manual and find out if you have used any unsupported element type. Also post the .cfg file used for conversion if you can.


All times are GMT -4. The time now is 13:31.