Engine effects/nacelle bc's

kirkrich · January 14, 2013, 21:24

The release information for v2.0 says there is the capability for engine effects, and I noticed in the documentation nacelle boundary conditions. Is there any information (papers, documentation, presentations, examples) on the implementation of the engine/nacelle boundary conditions?

fpalacios · January 15, 2013, 02:23

First of all, thank you for your interest in SU2.
We are directing very significant efforts at the development of documentation, a lot of information can be found in our webpage (tutorial), our AIAA papers ( complete list in http://adl.stanford.edu/docs/pages/v...pageId=2457747 ), and in a survey paper http://su2.stanford.edu/documents/SU2_AIAA_ASM2013.pdf

With respect to the engine boundary condition. That implementation has been validated in an industrial project and the results will be presented in the AIAA Fluid Dynamics and Co-located Conferences and Exhibit (June, 2013).

The current implementation of the engine boundary conditions is based in the proper use of Riemann invariants (characteristics based method) and it allows the imposition of total nozzle temperature and pressure in the exhaust, and fan face Mach number in the inflow (a minimal modification allows mass flow rate in the inflow). Please note that the template config file contains some useful information.

Best,
Francisco

kirkrich · January 16, 2013, 03:01

Hey Francisco, thanks for the information. I looked at the template configuration file and I see the format for the input for the nacelle boundary conditions. For these type boundary conditions, and others, what does the ... at the end of the input mean? And for the nacelle inflow boundary condition, how do I determine the proper Mach number? I would also be interested to learn the modification to use mass flow for the inflow. Does the combination of the nacelle inflow/outflow boundary condition balance the mass flow through the engine? And finally, is there a way to simulate a Turbofan engine, say using two outflow bc's? Sorry for so many questions. I will try these bc's, that may answer some questions too. Thanks again...

economon · January 16, 2013, 15:58

Just to chime in on your question about the "..." in the boundary condition descriptions: this is meant to represent the fact that you can list more than one of these types of BCs by simply repeating the specified format for a different marker/set of conditions. The code has been written in a general manner that can accept multiple boundaries for each type of BC.

January 14, 2013, 21:24	Engine effects/nacelle bc's	#1
kirkrich New Member Join Date: Jan 2013 Posts: 7 Rep Power: 13	The release information for v2.0 says there is the capability for engine effects, and I noticed in the documentation nacelle boundary conditions. Is there any information (papers, documentation, presentations, examples) on the implementation of the engine/nacelle boundary conditions?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dealing with BC's in OF 1.6	vkrastev	OpenFOAM Running, Solving & CFD	5	September 4, 2012 11:58
Simplified engine simulation	lovecraft22	OpenFOAM	1	April 14, 2012 07:18
CFD of combustion process of Homogeneous Charge Compression Engine (HCCI)	kelvinlim	Main CFD Forum	2	January 26, 2012 22:19
Understanding Code behind BCs	Linse	OpenFOAM Programming & Development	8	January 9, 2012 08:58
Need Assistance: BCs for k-e model implementation	Dean Schrage	Main CFD Forum	3	August 11, 2001 01:02

January 15, 2013, 02:23		#2
fpalacios Super Moderator Francisco Palacios Join Date: Jan 2013 Location: Long Beach, CA Posts: 404 Rep Power: 15	First of all, thank you for your interest in SU2. We are directing very significant efforts at the development of documentation, a lot of information can be found in our webpage (tutorial), our AIAA papers ( complete list in http://adl.stanford.edu/docs/pages/v...pageId=2457747 ), and in a survey paper http://su2.stanford.edu/documents/SU2_AIAA_ASM2013.pdf With respect to the engine boundary condition. That implementation has been validated in an industrial project and the results will be presented in the AIAA Fluid Dynamics and Co-located Conferences and Exhibit (June, 2013). The current implementation of the engine boundary conditions is based in the proper use of Riemann invariants (characteristics based method) and it allows the imposition of total nozzle temperature and pressure in the exhaust, and fan face Mach number in the inflow (a minimal modification allows mass flow rate in the inflow). Please note that the template config file contains some useful information. Best, Francisco

January 16, 2013, 03:01		#3
kirkrich New Member Join Date: Jan 2013 Posts: 7 Rep Power: 13	Hey Francisco, thanks for the information. I looked at the template configuration file and I see the format for the input for the nacelle boundary conditions. For these type boundary conditions, and others, what does the ... at the end of the input mean? And for the nacelle inflow boundary condition, how do I determine the proper Mach number? I would also be interested to learn the modification to use mass flow for the inflow. Does the combination of the nacelle inflow/outflow boundary condition balance the mass flow through the engine? And finally, is there a way to simulate a Turbofan engine, say using two outflow bc's? Sorry for so many questions. I will try these bc's, that may answer some questions too. Thanks again...

January 16, 2013, 15:58		#4
economon Super Moderator Thomas D. Economon Join Date: Jan 2013 Location: Stanford, CA Posts: 271 Rep Power: 14	Just to chime in on your question about the "..." in the boundary condition descriptions: this is meant to represent the fact that you can list more than one of these types of BCs by simply repeating the specified format for a different marker/set of conditions. The code has been written in a general manner that can accept multiple boundaries for each type of BC.