SU2 FEM_LES not working

monika_1387 · February 23, 2020, 12:56

Hi Guys,

I finished my 2D simulation for C-D nozzle but when running for 3D nozzle with same conditions (.cfg file) with FEM_LES its not working and getting segmentation error. So do we need to have specific requirements or different schemes which need to be work with FEM_LES case or any FEM case? Because I am unable to run any FEM solver for my case. I have attached my latest .cfg file for reference. Please let me know if anyone ran LES in SU2 with same type conditions?

pcg · February 24, 2020, 05:34

Hi, you may want to open an issue on the SU2 GitHub. There is only one developer for the FEM solver and you are more likely to get an answer there.

monika_1387 · February 24, 2020, 09:25

Quote:

Originally Posted by pcg

Hi, you may want to open an issue on the SU2 GitHub. There is only one developer for the FEM solver and you are more likely to get an answer there.

Sure will do!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SU2 Incompressible tutorials not working	kp137	SU2	8	July 16, 2019 20:48
Import file from pointwise to SU2	JPBLourenco	Pointwise & Gridgen	2	January 16, 2017 10:57
Official Release of SU2 V3.2	economon	SU2 News & Announcements	6	April 17, 2015 23:28
Pointwise and SU2 joint workshop	fpalacios	SU2 News & Announcements	0	July 28, 2014 20:26
DPM parallel is not working but serial is working	johnwinter	FLUENT	1	March 27, 2012 02:01

February 24, 2020, 05:34		#2
pcg Senior Member Pedro Gomes Join Date: Dec 2017 Posts: 465 Rep Power: 13	Hi, you may want to open an issue on the SU2 GitHub. There is only one developer for the FEM solver and you are more likely to get an answer there.