Problems with SU2_SMC

Fang-SIAMM · June 26, 2013, 07:35

HI, everyone.

I'm using the SU2v2.0.4 to test the sliding mesh problem, but there are some questions as follows:
How do I define the MARKER_SLIDING in the configure file. Is the defination below right?
MARKER_SLIDING = ( inter-in,inter-out,inter-out,inter-in,0,1,1,0 ).
For Zone0, inter-in is the sliding boundary, while inter-out in Zone1 is the donor marker.

I'm trying to test the case in AIAA-2013-0632.

Thanks for help.

Fang

economon · June 28, 2013, 19:06

Hi Fang,

Great to hear that you're interested in the sliding mesh code! Unfortunately, we are still actively developing most of the sliding mesh machinery, and it is in the process of changing quite a bit due to other improvements we are making for parallelism, etc.

That being said, the unsteady adjoint for euler flows on single block meshes is functional. The same pitching airfoil case described in the paper should work with the most recent version of the code. Please feel free to contact me, if you would like some more info.

Cheers,
Tom

June 26, 2013, 07:35	Problems with SU2_SMC	#1
Fang-SIAMM New Member Fang Liang Join Date: Jan 2013 Posts: 3 Rep Power: 13	HI, everyone. I'm using the SU2v2.0.4 to test the sliding mesh problem, but there are some questions as follows: How do I define the MARKER_SLIDING in the configure file. Is the defination below right? MARKER_SLIDING = ( inter-in,inter-out,inter-out,inter-in,0,1,1,0 ). For Zone0, inter-in is the sliding boundary, while inter-out in Zone1 is the donor marker. I'm trying to test the case in AIAA-2013-0632. Thanks for help. Fang

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Problems with coedge curves and surfaces	tommymoose	ANSYS Meshing & Geometry	6	December 1, 2020 11:12
[mesh manipulation] Problems with rotational cyclic boundaries	TReviol	OpenFOAM Meshing & Mesh Conversion	8	July 11, 2014 03:45
[ICEM] Flow channel meshing problems	StefanG	ANSYS Meshing & Geometry	19	May 15, 2012 06:44
Two-phase air water flow problems by activating Wall Lubrication Force	challenger85	CFX	5	November 5, 2009 05:44
Help required to solve Hydraulic related problems	aero	CFX	0	October 30, 2006 11:00

June 28, 2013, 19:06		#2
economon Super Moderator Thomas D. Economon Join Date: Jan 2013 Location: Stanford, CA Posts: 271 Rep Power: 14	Hi Fang, Great to hear that you're interested in the sliding mesh code! Unfortunately, we are still actively developing most of the sliding mesh machinery, and it is in the process of changing quite a bit due to other improvements we are making for parallelism, etc. That being said, the unsteady adjoint for euler flows on single block meshes is functional. The same pitching airfoil case described in the paper should work with the most recent version of the code. Please feel free to contact me, if you would like some more info. Cheers, Tom