CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   SU2 (http://www.cfd-online.com/Forums/su2/)
-   -   Need output format explanation (http://www.cfd-online.com/Forums/su2/127207-need-output-format-explanation.html)

rnburne December 5, 2013 19:07

Need output format explanation
 
The problem at hand involves simple isentropic expansion in a duct. The calculated values for p, T and rho (nondimensionalized by inlet stagnation values) at a particular location correspond exactly with a Mach number of .82, just as expected. However, the calculated values of M and V are given as .48 and .54 . How are these numbers to be interpreted?

fpalacios January 11, 2014 23:29

The non-dmensionalization is described in

https://adl.stanford.edu/papers/AIAA-2013-0287.pdf

and implemented in
void CConfig::SetNondimensionalization(unsigned short val_nDim, unsigned short val_iZone) in config_structure.cpp

Maybe the first step is to take a look at the document and the code.

Best Regards,
Francisco


All times are GMT -4. The time now is 14:04.