X,Y plot

Jiang · August 16, 2012, 05:06

I'm trying to plot a X,Y line with Cp against theta of a cylinder, but im not sure how to approach it. im new to tecplot. any help would be nice, ty

blackmask · August 17, 2012, 09:53

Open a new file, say "XY.dat", and fill it with your data, two numbers per line, i.e.,
theta1 cp1
theta2 cp2
...
thetaN cpN
Save the file and then open it with TECPLOT.

Jiang · August 18, 2012, 03:31

This would work, yes thank you
But i have the case and data file from fluent. Which is loaded into TECPLOT, cant i use arbitrary Radius, Radius = X*X + Y*Y + Z*Z and then extract a iso-surface i want. then change the X varible in the XY plot to angle, theta of the cylinder?

kato · January 2, 2013, 07:56

hi
how to plot average velocity vs direction vector in fluent?

hgxiangyun · January 8, 2013, 04:00

i guess it is not conveninent to extract an iso-surface in tecplot, but you can get one in fluent easily. when you get the geometry surface in fluent, you can export the physical data(e.g. cp) with correspoding geometry position(e.g. x,y,z or r,theta,z) into an tecplot file. After this, you can load the tecplot file into tecplot and plot the cp vs theta curve

August 16, 2012, 05:06	X,Y plot	#1
Jiang New Member Join Date: Dec 2011 Posts: 2 Rep Power: 0	I'm trying to plot a X,Y line with Cp against theta of a cylinder, but im not sure how to approach it. im new to tecplot. any help would be nice, ty

January 2, 2013, 07:56	average velocity	#4
kato New Member toshiba Join Date: Jan 2013 Posts: 15 Rep Power: 2	hi how to plot average velocity vs direction vector in fluent?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to normalize the plot ( x,y axes) in Fluent	Eliasjal	FLUENT	2	February 29, 2012 02:24
plot x,y on fluent	Ricky	FLUENT	1	May 27, 2009 06:18
Transfer low-res graphic file plot to excel plot	quarkz	Main CFD Forum	3	April 9, 2009 13:54
graph plot	anindya	Main CFD Forum	2	September 17, 2003 12:00
why can't I plot Y+ value?	Jiaying Xu	CD-adapco	2	August 18, 2001 10:56

August 17, 2012, 09:53		#2
blackmask Senior Member Join Date: Aug 2011 Posts: 116 Rep Power: 6	Open a new file, say "XY.dat", and fill it with your data, two numbers per line, i.e., theta1 cp1 theta2 cp2 ... thetaN cpN Save the file and then open it with TECPLOT.

August 18, 2012, 03:31		#3
Jiang New Member Join Date: Dec 2011 Posts: 2 Rep Power: 0	This would work, yes thank you But i have the case and data file from fluent. Which is loaded into TECPLOT, cant i use arbitrary Radius, Radius = XX + YY + Z*Z and then extract a iso-surface i want. then change the X varible in the XY plot to angle, theta of the cylinder?

January 8, 2013, 04:00		#5
hgxiangyun New Member Join Date: Apr 2010 Posts: 2 Rep Power: 0	i guess it is not conveninent to extract an iso-surface in tecplot, but you can get one in fluent easily. when you get the geometry surface in fluent, you can export the physical data(e.g. cp) with correspoding geometry position(e.g. x,y,z or r,theta,z) into an tecplot file. After this, you can load the tecplot file into tecplot and plot the cp vs theta curve