CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Tecplot (http://www.cfd-online.com/Forums/tecplot/)
-   -   contours fluent ----->> tecplot (http://www.cfd-online.com/Forums/tecplot/111781-contours-fluent-tecplot.html)

lbmagis January 15, 2013 09:33

contours fluent ----->> tecplot
 
Hello CFD Friends :)
could you tell me please how to export contours of temperature for example from fluent to tecplot , and from matlab to tecplot . I want to print the two contours on the same figure in order to compare results of fluent with results of matlab
have a nice day Friends
Thank you so much .

scott_rumage January 16, 2013 12:21

One can load Fluent data into Tecplot 360 via the Fluent data loader, and in a separate frame one could load the Matlab data into Tecplot 360 via this mat2tecplot program described here: http://www.cfd-online.com/Forums/tecplot/103860-mat2tecplot.html
Once the two frames are in Tecplot and contoured to the same scale, one could then make one of the frames have a transparent background and then put the transparent frame on top of the other contour diagram.
This might provide the comparison you are seeking.

lbmagis January 31, 2013 15:35

Thank you Scott_rumage so much

lbmagis January 31, 2013 19:49

Hello again Scott_rumage
i didnt know how to do that?!!!could u describe me the different steps to that plz???i just downloaded the matlab code but it seems to not work
thanx a lot


All times are GMT -4. The time now is 22:10.