CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > Tecplot

Hybrid_unstructured mesh quality

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 23, 2014, 13:48
Default Hybrid_unstructured mesh quality
  #1
Member
 
Haris Hameed
Join Date: Oct 2009
Posts: 45
Rep Power: 16
harishameed33 is on a distinguished road
hi

i want to use the mesh quality measure availabe in tecplot Analyze > Calculate variables.

so my question is which variables are used for hybrid-unstructured meshes.

Equiangle skewness is one parameter to measure the quality of the mesh but in tecplot there are I face skewness, J Face skewness and K face skewness so could these be used to see the mesh quality.

0 being the excellent mesh and 1 is the worst .

thanks
harishameed33 is offline   Reply With Quote

Reply

Tags
hybrid-unstructured, mesh, quality, tecplot

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
Polyhedral Mesh Quality in Star-CCM+ niazaliahmed STAR-CCM+ 3 March 8, 2012 14:51
[ICEM] Tetra mesh quality before and after prism layer Chander ANSYS Meshing & Geometry 0 December 25, 2011 23:04
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10


All times are GMT -4. The time now is 06:03.