CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > Tecplot

Streamlines under Moving reference frame; Spiral streamline from Tecplot

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 28, 2009, 20:49
Question Streamlines under Moving reference frame; Spiral streamline from Tecplot
  #1
New Member
 
Join Date: Apr 2009
Posts: 9
Rep Power: 16
aiqch is on a distinguished road
Hi,
I plot streamlines based on velocity field for a rising bubble using Tecplot and my own program.
In Tecplot, I got SPIRIAL streamlines inside bubble, which should be closed streamlines (closed loops). I found a similar discussion posted before in this forum but was not given a solution (http://www.cfd-online.com/Forums/mai...treamline.html).
I also calculated stream function in my own program. However, the plot of streamlines (contour plot) looks like the streamlines in Stationary reference frame. I use Moving reference frame (which is attached to the rising bubble). I did correct boundary conditions for stream function corresponding to Moving reference frame. Should I correct the governing equation (vorticity) too? (It is related to the derivative of z-velocity which should not be affected by adding a constant or not).
I appreciate any idea.
aiqch is offline   Reply With Quote

Old   October 29, 2009, 07:52
Default
  #2
New Member
 
Ananda Himansu
Join Date: Apr 2009
Location: Cleveland, Ohio, USA
Posts: 17
Rep Power: 16
Ananda Himansu is on a distinguished road
Check that the stream function calculated in your own program gives you the correct streamlines when there is no bubble, i.e., the streamlines of a uniform flow at the negative of the bubble velocity. Then keep in mind that while the vorticity (being a derivative of the velocity) is unaffected by adding a constant to the velocity, the stream function on the other hand (being an integral of the velocity) is indeed changed by adding a constant to the velocity.
Ananda Himansu is offline   Reply With Quote

Old   October 30, 2009, 00:27
Default
  #3
New Member
 
Join Date: Apr 2009
Posts: 9
Rep Power: 16
aiqch is on a distinguished road

Thanks a lot for your timely help, Ananda. I will give a try about what you said.
aiqch is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error with Wmake skabilan OpenFOAM Installation 3 July 28, 2009 01:35
Help for Moving Reference Frame. aiqch Main CFD Forum 0 April 3, 2009 01:23
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
G95 + CGNS Bruno Main CFD Forum 1 January 30, 2007 01:34
Building OpenFoAm on SGI Altix 64bits anne OpenFOAM Installation 8 June 15, 2006 10:27


All times are GMT -4. The time now is 08:03.