Home > Forums > Special Topics > Visualization & Post-Processing

Change

Updated Threads

Reply

Search this Thread

November 12, 2013, 18:19	Change default blade positioning	#1
jonasmmiguel New Member Jonas Join Date: Aug 2013 Posts: 1 Rep Power: 0	Hello all, I'm new here. I have simulated the flow inside a centrifugal impeller using BladeGen/Turbo Grid/CFX. Is it possible to visually change/transform the representative periodic domain (default instancing of blade passage), so that main blades are at the periodic side surfaces rather than one main blade in the middle of periodic domain? I want to do this because it would be a lot easier to post-process in another software. Last edited by jonasmmiguel; November 13, 2013 at 12:13.

Reply

Tags

centrifugal compressor, periodic blocks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solid/liquid phase change	fabian_roesler	OpenFOAM	10	December 24, 2012 06:37
Old OpenFOAM Users, Read This if you Want to Change Username	pete	Site Help, Feedback & Discussions	0	March 16, 2009 04:29
Model foaming process: change the volume / density	pmp77	CFX	0	November 18, 2008 09:53
How to change contour line thickness?	Mishar	Siemens	0	December 15, 2004 10:28
How to change the reference pressure value to 0 Pa	Lee	Siemens	2	July 1, 2003 00:32

All times are GMT -4. The time now is 00:15.