Low-Re k-epsilon models
From CFD-Wiki
IainBarton (Talk | contribs) (→Model constants, daming functions and boundary conditions) |
m |
||
Line 1: | Line 1: | ||
+ | {{Turbulence modeling}} | ||
==Introduction== | ==Introduction== | ||
- | Good reviews of classical Low-Re k-epsilon models can be found in [[#References|[Patel (1995)]]] and [[#References|[Rodi (1993)]]]. There are hundreds of different low-Re k-epsilon models in the | + | Good reviews of classical Low-Re k-epsilon models can be found in [[#References|[Patel (1995)]]] and [[#References|[Rodi (1993)]]]. There are hundreds of different low-Re k-epsilon models in the literature. This article tries to summarize and describe the most common and classical models. Feel free to add more models here, but please only add models that have gained a widespread use in the CFD community. |
==Overview of models== | ==Overview of models== | ||
Line 122: | Line 123: | ||
{{reference-paper|author=Launder, B. E. and Sharma, B. I.|year=1974|title=Application of the Energy-Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc|rest=Letters in Heat and Mass Transfer, Vol. 1, No. 2, pp. 131-138}} | {{reference-paper|author=Launder, B. E. and Sharma, B. I.|year=1974|title=Application of the Energy-Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc|rest=Letters in Heat and Mass Transfer, Vol. 1, No. 2, pp. 131-138}} | ||
- | |||
- | |||
- |
Revision as of 15:20, 18 August 2007
Contents |
Introduction
Good reviews of classical Low-Re k-epsilon models can be found in [Patel (1995)] and [Rodi (1993)]. There are hundreds of different low-Re k-epsilon models in the literature. This article tries to summarize and describe the most common and classical models. Feel free to add more models here, but please only add models that have gained a widespread use in the CFD community.
Overview of models
The models presented presented here are:
Model | Reference | Description |
Chien Model | [Chien (1982}] | A very common model in turbomachinery applications. Has nice numerical properties. |
Launder-Sharma Model | [Launder (1974)] | An old classical model which has attracted some attention for its ability to in model cases predict by-pass transition. |
Nagano-Tagawa Model | [Nagano (1990)] | A model originally developed for heat-transfer applications. |
Governing equations
These models can be written in a general form like:
Where , , , and are model constants. The damping functions , and and the extra source terms and are only active close to solid walls and makes it possible to solve and down to the viscous sublayer. Table below summarizes the constants, damping functions and boundary conditions for all k-epsilon models presented here.
Model constants, daming functions and boundary conditions
Chien | Launder-Sharma | Nagano-Tagawa | |
A | |||
Where , and .
A According to P. Gardin, M.Brunet, J.F.Domgin and K. Pericleous, "An experimental and numerical CFD study of turbulence in a tundish container", 2nd International Conference on CFD, CSIRO, 1999. There are three options for
D1
D2
D3
Performance, applicability and limitations
Not written yet
Implementation issues
Not written yet
References
Chien, K.-Y. (1982), "Predictions of Channel and Boundary-Layer Flows with a Low-Reynolds Number Turbulence Model", AIAA Journal, Vol. 20, No. 1, pp. 33-38.
Nagano, Y. and Tagawa, M. (1990), "An Improved k-epsilon Model for Boundary Layer Flows", Journal of Fluids Engineering, Vol. 112, pp. 33-39.
Patel, V. C. and Rodi, W. and Scheuerer, G. (1985), "Turbulence Models for Near-Wall and Low Reynolds Number Flows: A Review", AIAA Journal, Vol. 23, No. 9, pp. 1308-1319.
Rodi, W. and Mansour, N. N. (1993), "Low Reynolds Number k-epsilon Modeling with the Aid of Direct Simulation Data", Journal of Fluid Mechanics, Vol. 250, pp. 509-529.
Launder, B. E. and Sharma, B. I. (1974), "Application of the Energy-Dissipation Model of Turbulence to the Calculation of Flow Near a Spinning Disc", Letters in Heat and Mass Transfer, Vol. 1, No. 2, pp. 131-138.