CFD Online Logo CFD Online URL
Home > Wiki > Mesh generation

Mesh generation

From CFD-Wiki

Revision as of 06:26, 21 September 2005 by Anurag (Talk | contribs)
Jump to: navigation, search

The set of partial differential equations governing fluid flows and heat transfers are not amenable to analytical solutions, except for very simple cases. Therefore, in general, in order to analyze fluid flows, flow domains are split into smaller portions (made up of geometric primitives like hexahedra and tatrahedra in 3D, and quadrilaterals and triangles in 2D) and linearized governing equations are solved inside each of these portions of the domain. Care is taken to ensure continuity of solution across the common interfaces between two portions, so that the linearized solutions inside various portions can be put together to give a complete picture of fluid flow in the entire domain. Each of the portions of the domain are known as elements, and the collection of all elements is known as mesh or grid. The origin of the term mesh (or grid) goes back to early days of CFD when most analyses were 2D in nature. For 2D analysis, a domain split into elements resembles a wire mesh, hence the name.

Examples of a 2D analysis domain (flow over a backward facing step) and its mesh are shown in pictures below.

Domain for 2D analysis of backward facing step Meshed domain

Mesh generation is the field of CFD which deals with creation of meshes from given domain definitions. There are various classifications of meshes, and mesh generation can be a very complex process in itself. Meshes can be classified based one on or more the following important criteria:

  • Dimension (2D or 3D)
  • Connectivity (structured or unstructured)
  • Element types (tetrahedral, hexahedral or hybrid)
  • Inter element connectivity (conformal or non-conformal)
My wiki