# Near-wall treatment for k-epsilon models

(Difference between revisions)
 Revision as of 09:51, 8 May 2006 (view source)Mlakehel (Talk | contribs)← Older edit Latest revision as of 17:04, 18 December 2008 (view source)Peter (Talk | contribs) m (Reverted edits by BasdaRdron (Talk) to last version by Jola) (5 intermediate revisions not shown) Line 1: Line 1: - [[Introduction]] + {{Turbulence modeling}} + [[Low-Re k-epsilon models]] - Depending heavily on the problem description and the main quantity solution based on, the k-e model is influenced by the user to capture the phisical phonomena. heat transfer problems, high mach numbers with thin attached layers, low mach number with separations and heavy back flows ...etc. alle these different combinations requires an experimented user to define the priority and the solution dependency value. + {{stub}} - + - [[Heat Transfert Dominated problems]] + - + - + - [[Low Mach Numbers Dominated Problems]] + - + - + - [[High Mach Numbers Dominated Problems]] + - + - + - [[Influence of Reynolds Numer]] +