CFD Online Logo CFD Online URL
Home > Wiki > Near-wall treatment for k-epsilon models

Near-wall treatment for k-epsilon models

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(marked as stub and wrote page titles for non-existing links in a more complete way)
m (Reverted edits by BasdaRdron (Talk) to last version by Jola)
(4 intermediate revisions not shown)
Line 1: Line 1:
Depending heavily on the problem description and the main quantity solution based on, the k-e model is influenced by the user to capture the phisical phonomena. heat transfer problems, high mach numbers with thin attached layers, low mach number with separations and heavy back flows ...etc. alle these different combinations requires an experimented user to define the priority and the solution dependency value.
{{Turbulence modeling}}
[[Low-Re k-epsilon models]]
[[Near-wall treatment for heat transfert dominated problems]]
[[Near-wall treatment for low mach numbers dominated problems]]
[[Near-wall treatment for high mach numbers dominated problems]]
[[Near-wall treatment, influence of Reynolds number]]

Latest revision as of 17:04, 18 December 2008

Turbulence modeling
RANS-based turbulence models
  1. Linear eddy viscosity models
    1. Algebraic models
      1. Cebeci-Smith model
      2. Baldwin-Lomax model
      3. Johnson-King model
      4. A roughness-dependent model
    2. One equation models
      1. Prandtl's one-equation model
      2. Baldwin-Barth model
      3. Spalart-Allmaras model
    3. Two equation models
      1. k-epsilon models
        1. Standard k-epsilon model
        2. Realisable k-epsilon model
        3. RNG k-epsilon model
        4. Near-wall treatment
      2. k-omega models
        1. Wilcox's k-omega model
        2. Wilcox's modified k-omega model
        3. SST k-omega model
        4. Near-wall treatment
      3. Realisability issues
        1. Kato-Launder modification
        2. Durbin's realizability constraint
        3. Yap correction
        4. Realisability and Schwarz' inequality
  2. Nonlinear eddy viscosity models
    1. Explicit nonlinear constitutive relation
      1. Cubic k-epsilon
      2. EARSM
    2. v2-f models
      1. \overline{\upsilon^2}-f model
      2. \zeta-f model
  3. Reynolds stress model (RSM)
Large eddy simulation (LES)
  1. Smagorinsky-Lilly model
  2. Dynamic subgrid-scale model
  3. RNG-LES model
  4. Wall-adapting local eddy-viscosity (WALE) model
  5. Kinetic energy subgrid-scale model
  6. Near-wall treatment for LES models
Detached eddy simulation (DES)
Direct numerical simulation (DNS)
Turbulence near-wall modeling
Turbulence free-stream boundary conditions
  1. Turbulence intensity
  2. Turbulence length scale

Low-Re k-epsilon models

My wiki