CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > RNG k-epsilon model

RNG k-epsilon model

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(Transport Equations: the eta^3 term in the numerator is because the P_k factor has been incorporated, so the special RNG term is a modification of C_{2\epsilon})
 
(2 intermediate revisions not shown)
Line 1: Line 1:
-
{| class="infobox bordered" style="vertical-align: top; text-align: left;"
+
{{Turbulence modeling}}
-
|+ style="background: #ccf; font-size: larger;" align="center" | '''[[Turbulence modeling]]'''
+
-
|-
+
-
| '''[[Turbulence]]'''
+
-
|-
+
-
|
+
-
* [[What is turbulence%3F|Introduction]]
+
-
* [[Elements of statistical analysis|Statistical analysis]]
+
-
* [[Reynolds averaged equations and the turbulence closure problem|Reynolds averaging]]
+
-
|-
+
-
| '''[[Algebraic turbulence models|Algebraic models]]'''
+
-
|-
+
-
|
+
-
* [[Cebeci-Smith model]]
+
-
* [[Baldwin-Lomax model]]
+
-
* [[Johnson-King model]]
+
-
|-
+
-
| '''[[One equation turbulence models|One equation models]]'''
+
-
|-
+
-
|
+
-
* [[Prandtl's one-equation model]]
+
-
* [[Baldwin-Barth model]]
+
-
* [[Spalart-Allmaras model]]
+
-
|-
+
-
| '''[[Two equation models]]'''
+
-
|-
+
-
|
+
-
* [[k-epsilon models]]
+
-
:[[Standard k-epsilon model]]
+
-
:[[Realisable k-epsilon model]]
+
-
:[[RNG k-epsilon model]]
+
-
:[[Near-wall treatment for k-epsilon models|Near-wall treatment]]
+
-
*[[k-omega models]]
+
-
:[[Wilcox's k-omega model]]
+
-
:[[Wilcox's modified k-omega model]]
+
-
:[[SST k-omega model]]
+
-
:[[Near-wall treatment for k-omega models|Near-wall treatment]]
+
-
* [[Two equation turbulence model constraints and limiters|Contraints and limiters]]
+
-
:[[Kato-Launder modification]]
+
-
:[[Durbin's realizability constraint]]
+
-
:[[Yap correction]]
+
-
|}
+
-
 
+
-
==Background==
+
The RNG model was developed using Re-Normalisation Group (RNG) methods by [[#References|Yakhot et al]] to renormalise the Navier-Stokes equations, to account for the effects of smaller scales of motion. In the standard k-epsilon model the eddy viscosity is determined from a single turbulence length scale, so the calculated turbulent diffusion is that which occurs only at the specified scale, whereas in reality all scales of motion will contribute to the turbulent diffusion. The RNG approach, which is a mathematical technique that can be used to derive a turbulence model similar to the k-epsilon, results in a modified form of the epsilon equation which attempts to account for the different scales of motion through changes to the production term.  
The RNG model was developed using Re-Normalisation Group (RNG) methods by [[#References|Yakhot et al]] to renormalise the Navier-Stokes equations, to account for the effects of smaller scales of motion. In the standard k-epsilon model the eddy viscosity is determined from a single turbulence length scale, so the calculated turbulent diffusion is that which occurs only at the specified scale, whereas in reality all scales of motion will contribute to the turbulent diffusion. The RNG approach, which is a mathematical technique that can be used to derive a turbulence model similar to the k-epsilon, results in a modified form of the epsilon equation which attempts to account for the different scales of motion through changes to the production term.  
Line 52: Line 9:
:<math>
:<math>
-
\frac{\partial}{\partial t} (\rho \epsilon) + \frac{\partial}{\partial x_i} (\rho \epsilon u_i) = \frac{\partial}{\partial x_j} \left[\left(\mu+\frac{\mu_t}{\sigma_{\epsilon}}\right) \frac{\partial \epsilon}{\partial x_j}\right] + C_{1 \epsilon}^*\frac{\epsilon}{k} P_k - C_{2\epsilon} \rho \frac{\epsilon^2}{k}
+
\frac{\partial}{\partial t} (\rho \epsilon) + \frac{\partial}{\partial x_i} (\rho \epsilon u_i) = \frac{\partial}{\partial x_j} \left[\left(\mu+\frac{\mu_t}{\sigma_{\epsilon}}\right) \frac{\partial \epsilon}{\partial x_j}\right] + C_{1 \epsilon}\frac{\epsilon}{k} P_k - C_{2\epsilon}^* \rho \frac{\epsilon^2}{k}
</math>
</math>
where
where
<math>
<math>
-
C_{1\epsilon}^* = C_{1\epsilon} - {C_\mu \eta^3 (1-\eta/\eta_0)\over 1+\beta\eta^3}
+
C_{2\epsilon}^* = C_{2\epsilon} + {C_\mu \eta^3 (1-\eta/\eta_0)\over 1+\beta\eta^3}
</math>
</math>
Line 66: Line 23:
and
and
<math>
<math>
-
S=2(S_{ij}S_{ij})^{1/2}
+
S=(2S_{ij}S_{ij})^{1/2}
</math>
</math>
With the turbulent viscosity being calculated in the same manner as with the standard k-epsilon model.
With the turbulent viscosity being calculated in the same manner as with the standard k-epsilon model.
 +
==Constants==
==Constants==
It is interesting to note that the values of all of the constants (except <math> \beta</math>) are derived explicitly in the RNG procedure. They are given below with the commonly used values in the standard k-epsilon equation in brackets for comparison:
It is interesting to note that the values of all of the constants (except <math> \beta</math>) are derived explicitly in the RNG procedure. They are given below with the commonly used values in the standard k-epsilon equation in brackets for comparison:

Latest revision as of 02:44, 5 June 2010

Turbulence modeling
Turbulence
RANS-based turbulence models
  1. Linear eddy viscosity models
    1. Algebraic models
      1. Cebeci-Smith model
      2. Baldwin-Lomax model
      3. Johnson-King model
      4. A roughness-dependent model
    2. One equation models
      1. Prandtl's one-equation model
      2. Baldwin-Barth model
      3. Spalart-Allmaras model
    3. Two equation models
      1. k-epsilon models
        1. Standard k-epsilon model
        2. Realisable k-epsilon model
        3. RNG k-epsilon model
        4. Near-wall treatment
      2. k-omega models
        1. Wilcox's k-omega model
        2. Wilcox's modified k-omega model
        3. SST k-omega model
        4. Near-wall treatment
      3. Realisability issues
        1. Kato-Launder modification
        2. Durbin's realizability constraint
        3. Yap correction
        4. Realisability and Schwarz' inequality
  2. Nonlinear eddy viscosity models
    1. Explicit nonlinear constitutive relation
      1. Cubic k-epsilon
      2. EARSM
    2. v2-f models
      1. \overline{\upsilon^2}-f model
      2. \zeta-f model
  3. Reynolds stress model (RSM)
Large eddy simulation (LES)
  1. Smagorinsky-Lilly model
  2. Dynamic subgrid-scale model
  3. RNG-LES model
  4. Wall-adapting local eddy-viscosity (WALE) model
  5. Kinetic energy subgrid-scale model
  6. Near-wall treatment for LES models
Detached eddy simulation (DES)
Direct numerical simulation (DNS)
Turbulence near-wall modeling
Turbulence free-stream boundary conditions
  1. Turbulence intensity
  2. Turbulence length scale

The RNG model was developed using Re-Normalisation Group (RNG) methods by Yakhot et al to renormalise the Navier-Stokes equations, to account for the effects of smaller scales of motion. In the standard k-epsilon model the eddy viscosity is determined from a single turbulence length scale, so the calculated turbulent diffusion is that which occurs only at the specified scale, whereas in reality all scales of motion will contribute to the turbulent diffusion. The RNG approach, which is a mathematical technique that can be used to derive a turbulence model similar to the k-epsilon, results in a modified form of the epsilon equation which attempts to account for the different scales of motion through changes to the production term.

Contents

Transport Equations

There are a number of ways to write the transport equations for k and \epsilon, a simple interpretation where bouyancy is neglected is


 \frac{\partial}{\partial t} (\rho k) + \frac{\partial}{\partial x_i} (\rho k u_i) = \frac{\partial}{\partial x_j} \left[\left(\mu+\frac{\mu_t}{\sigma_k}\right) \frac{\partial k}{\partial x_j}\right] + P_k - \rho \epsilon

\frac{\partial}{\partial t} (\rho \epsilon) + \frac{\partial}{\partial x_i} (\rho \epsilon u_i) = \frac{\partial}{\partial x_j} \left[\left(\mu+\frac{\mu_t}{\sigma_{\epsilon}}\right) \frac{\partial \epsilon}{\partial x_j}\right] + C_{1 \epsilon}\frac{\epsilon}{k} P_k - C_{2\epsilon}^* \rho \frac{\epsilon^2}{k}

where 
C_{2\epsilon}^* = C_{2\epsilon} + {C_\mu \eta^3 (1-\eta/\eta_0)\over 1+\beta\eta^3}

and 
\eta = S k / \epsilon
and 
S=(2S_{ij}S_{ij})^{1/2}

With the turbulent viscosity being calculated in the same manner as with the standard k-epsilon model.

Constants

It is interesting to note that the values of all of the constants (except  \beta) are derived explicitly in the RNG procedure. They are given below with the commonly used values in the standard k-epsilon equation in brackets for comparison:

 C_\mu=0.0845 (0.09)
 \sigma_k=0.7194 (1.0)
 \sigma_\epsilon=0.7194 (1.30)
 C_{\epsilon 1}=1.42 (1.44)
 C_{\epsilon 2}=1.68 (1.92)
 \eta_0=4.38
 \beta=0.012 (derived from experiment)


Applicability and Use

Although the technique for deriving the RNG equations was quite revolutionary at the time, it's use has been more low key. Some workers claim it offers improved accuracy in rotating flows, although there are mixed results in this regard: It has shown improved results for modelling rotating cavities, but shown no improvements over the standard model for predicting vortex evolution (both these examples from individual experience). It is favoured for indoor air simulations.

References

Yakhot, V., Orszag, S.A., Thangam, S., Gatski, T.B. & Speziale, C.G. (1992), "Development of turbulence models for shear flows by a double expansion technique", Physics of Fluids A, Vol. 4, No. 7, pp1510-1520.

My wiki