CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Skin friction coefficient

Skin friction coefficient

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(To do)
 
(12 intermediate revisions not shown)
Line 5: Line 5:
Where <math>\tau_w</math> is the local [[wall shear stress]], <math>\rho</math> is the fluid density and <math>U_\infty</math> is the free-stream velocity (usually taken ouside of the boundary layer or at the inlet).
Where <math>\tau_w</math> is the local [[wall shear stress]], <math>\rho</math> is the fluid density and <math>U_\infty</math> is the free-stream velocity (usually taken ouside of the boundary layer or at the inlet).
 +
For a turbulent boundary layer several approximation formulas for the local skin friction for a flat plate can be used:
-
It is related to the momentum thickness as follows: C_f = 2(d theta)/ (d x)
+
1/7 power law:
 +
:<math>C_f = 0.0576 Re_x^{-1/5} \quad \mbox{for} \quad 5 \cdot 10^5 < Re_x < 10^7 </math>
-
''Someone should add some correlations and references for them here''
+
1/7 power law with experimental calibration (equation 21.12 in [[#References|[3]]]):
 +
 
 +
:<math>C_f = 0.0592 \, Re_x^{-1/5} \quad \mbox{for} \quad 5 \cdot 10^5 < Re_x < 10^7</math>
 +
 
 +
Schlichting (equation 21.16 footnote in [[#References|[3]]])
 +
 
 +
:<math>C_f = [ 2 \, log_{10}(Re_x) - 0.65 ] ^{-2.3} \quad \mbox{for} \quad Re_x < 10^9 </math>
 +
 
 +
Schultz-Grunov (equation 21.19a in [[#References|[3]]]):
 +
 
 +
:<math>C_f = 0.370 \, [ log_{10}(Re_x) ]^{-2.584} </math>
 +
 
 +
(equation 38 in [[#References|[1]]]):
 +
 
 +
:<math>1.0/C_f^{1/2} = 1.7 + 4.15 \, log_{10} (Re_x \, C_f) </math>
 +
 
 +
The following skin friction formulas are extracted from [[#References|[2]]],p.19. Proper reference needed:
 +
 
 +
Prandtl (1927):
 +
:<math> C_f = 0.074 \, Re_x^{-1/5} </math>
 +
 
 +
Telfer (1927):
 +
:<math> C_f = 0.34 \, Re_x^{-1/3} + 0.0012 </math>
 +
 
 +
Prandtl-Schlichting (1932):
 +
:<math> C_f = 0.455 \, [ log_{10}(Re_x)]^{-2.58} </math>
 +
 
 +
Schoenherr (1932):
 +
:<math> C_f = 0.0586 \, [ log_{10}(Re_x \, C_f )]^{-2} </math>
 +
 
 +
Schultz-Grunov (1940):
 +
:<math> C_f = 0.427 \, [ log_{10}(Re_x) - 0.407]^{-2.64} </math>
 +
 
 +
Kempf-Karman (1951):
 +
:<math> C_f = 0.055 \, Re_x^{-0.182} </math>
 +
 
 +
Lap-Troost (1952):
 +
:<math> C_f = 0.0648 \, [log_{10}(Re_x \, C_f^{0.5})-0.9526]^{-2} </math>
 +
 
 +
Landweber (1953):
 +
:<math> C_f = 0.0816 \, [log_{10}(Re_x) - 1.703]^{-2} </math>
 +
 
 +
Hughes (1954):
 +
:<math> C_f = 0.067 \, [log_{10}(Re_x) - 2 ] ^{-2} </math>
 +
 
 +
Wieghard (1955):
 +
:<math> C_f = 0.52 \, [log_{10}(Re_x)] ^{-2.685} </math>
 +
 
 +
ITTC (1957):
 +
:<math> C_f = 0.075 \, [log_{10}(Re_x) - 2 ] ^{-2} </math>
 +
 
 +
Gadd (1967):
 +
:<math> C_f = 0.0113 \, [log_{10}(Re_x) - 3.7 ] ^{-1.15} </math>
 +
 
 +
Granville (1977):
 +
:<math> C_f = 0.0776 \, [log_{10}(Re_x) - 1.88 ] ^{-2} + 60 \, Re_x^{-1} </math>
 +
 
 +
Date Turnock (1999):
 +
:<math> C_f = [4.06 \, log_{10}(Re_x \, C_f) - 0.729]^{-2} </math>
 +
 
 +
 
 +
== References ==
 +
# {{reference-paper|author=von Karman, Theodore |year=1934|title=Turbulence and Skin Friction|rest=J. of the Aeronautical Sciences, Vol. 1, No 1, 1934, pp. 1-20}}
 +
# {{reference-paper|author=Lazauskas, Leo Victor |year=2005|title=Hydrodynamics of Advanced High-Speed Sealift Vessels|rest=Master Thesis, University of Adelaide, Australia ([http://digital.library.adelaide.edu.au/dspace/bitstream/2440/37729/1/02whole.pdf download])}}
 +
# {{reference-book|author=Schlichting, Hermann |year=1979|title=Boundary Layer Theory|rest=ISBN 0-07-055334-3, 7th Edition}}
 +
 
 +
== To do ==
 +
 
 +
''Someone should add more data about total skin friction approximations, Prandtl-Schlichting skin-friction formula, and the Karman-Schoenherr equation.''
 +
''Add proper reference for equations in [2]''
{{stub}}
{{stub}}
 +
 +
Edit:
 +
With regards to the 1/7th power law, in Schlichtings book (see references) the formula describing Cf over a flat plate , without pressure gradient, is Cf=0.0725*Re^(-1/5) and it is valid between 5x10^5<Re<10^7  with the assumption of the flow being turbulent from the leading edge (page 639)
 +
This is found in page 638 , formula 21.11.
 +
 +
Taking into account that the flow is laminar for the first part of the plate and using Blasius's equeation, after providing corrective some corrective factors , Schlichting in page 644 states:
 +
Cf=0.02666*Rl^(-0.139)
 +
There should be a separation between local and total skin friction on the plate.grizos

Latest revision as of 12:14, 14 January 2016

The skin friction coefficient, C_f, is defined by:

C_f \equiv \frac{\tau_w}{\frac{1}{2} \, \rho \, U_\infty^2}

Where \tau_w is the local wall shear stress, \rho is the fluid density and U_\infty is the free-stream velocity (usually taken ouside of the boundary layer or at the inlet).

For a turbulent boundary layer several approximation formulas for the local skin friction for a flat plate can be used:

1/7 power law:

C_f = 0.0576 Re_x^{-1/5} \quad \mbox{for} \quad 5 \cdot 10^5 < Re_x < 10^7

1/7 power law with experimental calibration (equation 21.12 in [3]):

C_f = 0.0592 \, Re_x^{-1/5} \quad \mbox{for} \quad 5 \cdot 10^5 < Re_x < 10^7

Schlichting (equation 21.16 footnote in [3])

C_f = [ 2 \, log_{10}(Re_x) - 0.65 ] ^{-2.3} \quad \mbox{for} \quad Re_x < 10^9

Schultz-Grunov (equation 21.19a in [3]):

C_f = 0.370 \, [ log_{10}(Re_x) ]^{-2.584}

(equation 38 in [1]):

1.0/C_f^{1/2} = 1.7 + 4.15 \, log_{10} (Re_x \, C_f)

The following skin friction formulas are extracted from [2],p.19. Proper reference needed:

Prandtl (1927):

 C_f = 0.074 \, Re_x^{-1/5}

Telfer (1927):

 C_f = 0.34 \, Re_x^{-1/3} + 0.0012

Prandtl-Schlichting (1932):

 C_f = 0.455 \, [ log_{10}(Re_x)]^{-2.58}

Schoenherr (1932):

 C_f = 0.0586 \, [ log_{10}(Re_x \, C_f )]^{-2}

Schultz-Grunov (1940):

 C_f = 0.427 \, [ log_{10}(Re_x) - 0.407]^{-2.64}

Kempf-Karman (1951):

 C_f = 0.055 \, Re_x^{-0.182}

Lap-Troost (1952):

 C_f = 0.0648 \, [log_{10}(Re_x \, C_f^{0.5})-0.9526]^{-2}

Landweber (1953):

 C_f = 0.0816 \, [log_{10}(Re_x) - 1.703]^{-2}

Hughes (1954):

 C_f = 0.067 \, [log_{10}(Re_x) - 2 ] ^{-2}

Wieghard (1955):

 C_f = 0.52 \, [log_{10}(Re_x)] ^{-2.685}

ITTC (1957):

 C_f = 0.075 \, [log_{10}(Re_x) - 2 ] ^{-2}

Gadd (1967):

 C_f = 0.0113 \, [log_{10}(Re_x) - 3.7 ] ^{-1.15}

Granville (1977):

 C_f = 0.0776 \, [log_{10}(Re_x) - 1.88 ] ^{-2} + 60 \, Re_x^{-1}

Date Turnock (1999):

 C_f = [4.06 \, log_{10}(Re_x \, C_f) - 0.729]^{-2}


References

  1. von Karman, Theodore (1934), "Turbulence and Skin Friction", J. of the Aeronautical Sciences, Vol. 1, No 1, 1934, pp. 1-20.
  2. Lazauskas, Leo Victor (2005), "Hydrodynamics of Advanced High-Speed Sealift Vessels", Master Thesis, University of Adelaide, Australia (download).
  3. Schlichting, Hermann (1979), Boundary Layer Theory, ISBN 0-07-055334-3, 7th Edition.

To do

Someone should add more data about total skin friction approximations, Prandtl-Schlichting skin-friction formula, and the Karman-Schoenherr equation. Add proper reference for equations in [2]



Edit: With regards to the 1/7th power law, in Schlichtings book (see references) the formula describing Cf over a flat plate , without pressure gradient, is Cf=0.0725*Re^(-1/5) and it is valid between 5x10^5<Re<10^7 with the assumption of the flow being turbulent from the leading edge (page 639) This is found in page 638 , formula 21.11.

Taking into account that the flow is laminar for the first part of the plate and using Blasius's equeation, after providing corrective some corrective factors , Schlichting in page 644 states: Cf=0.02666*Rl^(-0.139) There should be a separation between local and total skin friction on the plate.grizos

My wiki