CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Passed Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Passed Event 1 - 100 of 2659, Sorted by Start Date:

February, 2017
  • AxCYCLE Workshop
    Course, Boston, United States, February 22, 2017

    This training provides participants with a practical understanding of the design, analysis and optimization of thermodynamic cycles using AxCYCLE™

  • OpenFOAM Stammtisch User Meeting
    User Conference, Universität Kassel, Campus Center, Moritzstrasse 18, Kassel, Germany, Germany, February 20, 2017

    European users gather to exchange experiences in the use of OpenFOAM technology.

  • One Month course on Advanced CFD analysis from 15-February-2017 (Morning and Evening batch)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 15, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • Sunday batch :Course on Advanced CFD analysis from 12-February-2017 (10:30 Am to 6 PM, 12 Sundays)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 12, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • Water Resources: a comprehensive review of FLOW-3D’s modeling capabilities
    Online Event, February 9, 2017

    Following a series of webinars that have focused on various aspects of civil infrastructure and environmental flow modeling, this presentation will offer a comprehensive review of the modeling options that are currently available to water resource engineers using the CFD tool FLOW-3D.

  • Designing a 1,000mph car - the use of CFD
    Seminar, Oxford e-Research Centre, 7 Keble Road, Oxford, United Kingdom, February 9, 2017

    The BLOODHOUND Supersonic Car is set to take the Land Speed Record into a whole new era. The team plans to take a manned vehicle to 1000mph by 2018, increasing the current Land Speed Record (763mph) by over 30%. This target presents the Bloodhound CFD team with massive scientific and engineering challenges. Dr Ben Evans of the University of Swansea will talk about the aerodynamics of the Bloodhound SSC project and discuss the extreme challenges of designing a car to reach 1000mph.

  • AxSTREAM 3 Day Workshop
    Course, Boston, United States, February 8, 2017

    his training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery equipment using the AxSTREAM® software platform.

  • AxSTREAM 3 Day Workshop
    Course, Zug, Switzerland, February 8, 2017

    This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery equipment using the AxSTREAM® software platform.

  • Radial Compressor Design and Optimization
    Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 6, 2017

    The short course provides an overview of the present knowledge and flow models and intends to provide a good background for the people interested in the aerodynamic design of radial compressors.

  • One Month course on Advanced CFD analysis from 01-February-2017 (Morning and Evening batch)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • Rotor Dynamics and Bearing Design
    Course, Zug, Switzerland, February 1, 2017

    This course covers rotor dynamics analysis and bearings simulation for different types of rotors and bearings (journal, gas, rolling elements). Rotor dynamics fundamentals, basic design rules and analyses according API and other standards, bearing simulation aspects and more are explained.understanding of the design, analysis and optimization of flow paths for turbomachinery equipment using the AxSTREAM® software platform.

  • Webinar: Design of High Efficiency Compressors with Low GWP Refrigerants
    Online Event, February 1, 2017

    Register to see how the different modules of TURBOdesign Suite can be used to develop high efficiency compressors for new refrigerants with low Global Warming Potential (GWP).

  • FloMASTER v8.0 - Industrial Fluid System Simulation
    Online Event, February 1, 2017

    The eagerly anticipated Version 8.0 of FloMASTER is now available and you have the opportunity to see how you can benefit in your design process in this new live web seminar.

  • Industry oriented course on CFD analysis (Ansys Fluent, Ansys CFX, Ansys ICEMCFD-Hexa).
    Online Event, February 1, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • Live Webinar - Get to know FieldView 16.1
    Online Event, February 1, 2017

    Register now for your chance to get to know the new FieldView 16.1 update in a live webinar with Yves-Marie Lefebvre, our FieldView Product Chief. Demonstration and exploration of the features our customers asked for and how they will help all CFD users be more productive.

January, 2017
  • Live Webinar - Get to know FieldView 16.1
    Online Event, January 31, 2017

    Register now for your chance to get to know the new FieldView 16.1 update in a live webinar with Yves-Marie Lefebvre, our FieldView Product Chief. Demonstration and exploration of the features our customers asked for and how they will help all CFD users be more productive.

  • Second CFD Workshop at UTM, Malaysia
    Workshop, HiREF Laboratory, Faculty of Mechanical, UTM, Skudai, Malaysia, January 30, 2017

    A comprehensive course and workshop on CFD held at Malaysia's premier university of technology, UTM

  • AxSTREAM 3 Day Workshop
    Course, Boston, United States, January 25, 2017

    This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery equipment using the AxSTREAM® software platform.

  • FloTHERM XT: Compressing the Thermal Design Process
    Online Event, January 25, 2017

    Incorporating FloTHERM XT into your work flow can reduce your design process time by a factor of at least 2 when compared to traditional general-purpose simulation products. A thermal design using the BeagleBone Black board will be used to demonstrate FloTHERM XT's CAD-centric approach.

  • Flowing Matter 2017
    Conference, Faculty of Engineering, University of Porto, Porto, Portugal, January 23, 2017

    This conference will serve as an important event to get the three scientific communities involved in the COST Action MP1305 closer to each other: complex fluids (suspensions, granular materials, glasses, rheology), active matter (biological and synthetic micro-swimmers, bird flocks, insect swarms), and complex flows (turbulence, chaotic flows). The ultimate goal is to stimulate the interaction between these three scientific communities working on Flowing Matter.

  • Advanced Methods in Computational Fluid Dynamics
    Course, George Begg Building, School of MACE, University of Manchester, Manchester, United Kingdom, January 23, 2017

    This four (04) day course will address the analysis of modern approaches to turbulence modelling, different models and their applications to the solution of industrial problems including external and internal aerodynamics, heat transfer, combustion, aero-acoustics, Lattice Boltzmann Method, Smooth Particle Hydrodynamics (SPH), waves and tidal energy extraction modelling. The course also induces two (02) days of practical training on edf’s open source CFD solver Code_Saturne.

  • Multi-scale methods for non-reacting and reacting flow simulations
    Course, Université Libre de Bruxelles, Solbosch Campus, Bruxelles, Belgium, January 23, 2017

    The focus of the school is on bridging scales in modelling and simulation of reacting and non-reacting flows. Programme and school details are available at the website http://francquichair.wixsite.com/course

  • Introduction to Computational Fluid Dynamics
    Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, January 23, 2017

    The objective of these lecture series on "Introduction to CFD" is to provide an elementary tutorial presentation on computational fluid dynamics (CFD), emphasizing the fundamentals and surveying a variety of solution techniques whose applications range from low speed incompressible flow to hypersonic flow.

  • Axial Turbine Design 5-Day Training
    Course, Boston, United States, January 23, 2017

    The goal of this course is to provide engineers with a better understanding of steam and gas turbines and help them find new, more accurate, cost-saving solutions through successful axial turbine design and operation tasks.

  • Sunday batch :Course on Advanced CFD analysis from 22-January-2017 (10:30 Am to 6 PM, 12 Sundays)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 22, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • AxCYCLE Workshop
    Course, 1500 District Avenue, Burlington, United States, January 18, 2017

    This training provides participants with a practical understanding of the design, analysis and optimization of thermodynamic cycles using AxCYCLE™.

  • Motorsports Heat Exchanger Optimization
    Online Event, January 18, 2017

    Join this event to watch how to optimize the design of an F1 sidepod heat exchanger.

  • One Month course on Advanced CFD analysis from 15-January-2017 (Morning and Evening batch)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 15, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • International Bhurban Conference on Applied Sciences and Technology (IBCAST)
    Conference, National Centre for Physics (NCP), Quaid-i-Azam University, Islamabad, Pakistan, January 10, 2017

    Starting from the year 2002, the IBCAST is being held consecutively for over a decade. Until the year 2005, four technological areas namely; Advanced Materials, Control Engineering, Computational Fluid Dynamics and Wireless Communication & Radar were covered. Later, four more research areas - Biomedical Sciences, Cyber Security, Medical Sciences and Underwater Technologies were included. In 2015, another research area Aerostructures was also included in the conference.

  • AxSTREAM 3 Day Workshop
    Course, Bangalore, India, January 4, 2017

    This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery equipment using the AxSTREAM® software platform.

  • One Month course on Advanced CFD analysis from 02-January-2017 (Morning and Evening batch)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 2, 2017

    Perfect blend of Theory, Software and live projects. Classes conducted by Mr.Rudresh Ganganna , Former Scientist- ISRO. Know about your faculty, https://in.linkedin.com/in/rudresh-ganganna-b0684517

  • Axial & Centrifugal Pumps Fundamentals
    Course, Bangalore, India, January 2, 2017

    This course will lay the groundwork required for all engineers who are involved in design, optimization and operation of pumps.

  • fast Track Batch on CFD with OpenFOAM
    Course, Chinchwad, Pune, India, January 1, 2017

    This course is for you, if you are: New to OpenFOAM || You have partial training in OpenFOAM || Want to develop proficiency in CFD / OpenFOAM || Want to simplify the use of OpenFOAM || PG Student, Research Scholar, starting career in CFD || R&D person either in industry / lab etc

December, 2016
  • Product Design and Innovation using CFD and FEM
    Workshop, IIT (B.H.U), Mechanical Engineering Department, Varanasi, India, December 27, 2016

    Engineers, graduate students including masters and PhD students study lots of theory on Computer Aided Engineering (CAE), specially on Finite Element Method (FEM) and Computational Fluid Dynamics (CFD) but when comes to the application of theory. This short course would help Industry Engineers and Designers, Academic Institutions Faculty, Post Graduate and Research students in designs based on 21st Century Approach “Simulation Based Engineering Approach".

  • Twelfth International Conference of Fluid Dynamics (ICFD12)
    Conference, Le Méridien Pyramids Hotel , Cairo, Egypt, December 19, 2016

    The goals of the conference are to provide a forum for the development of experimental and computational methods and tools, to foster cross-fertilization among different fields of application, and most notably to enable communication between the scientists and researchers who build the theory and applicants who use it in fluid dynamics. The conference program will consist of presentations on subjects ranging from basic science reach to solid applications.

  • 3rd International Conference on Computational Methods in Engineering and Health Sciences , Dec 2016, Japan
    Conference, Tobata Campus, Kyushu Institute of Technology, Kitakyushu, Japan, December 17, 2016

    Two day International Conference on Computational Methods in Engineering and Health Sciences (ICCMEH-2016) serves the purpose of bringing together the computational scientists and engineers and medical fraternity from various interdisciplinary domains under a common forum. The theme of this conference will be broad covering several analytical and numerical techniques, and novel applications of computational techniques to solve problems in engineering, health sciences disciplines

  • 6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016)
    Conference, Department of Applied Mechanics, Allahabad, India, December 15, 2016

    FMFP is the most important conferences in the area of Fluid Mechanics and Fluid Power in India organised at one of the premier institutions of India every year under the aegis of the National Society of Fluid Mechanics and Fluid Power.

  • What’s New in FLOW-3D v11.2
    Online Event, December 15, 2016

    Please join Flow Science engineers for a webinar where they will discuss the latest developments in FLOW-3D v11.2.

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 4 hours per day , Lab/practical training 4 hours per day.

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • Best practices for forced and natural convection cooling simulations
    Online Event, December 15, 2016

    Basic sizing calculations, as well as the detailed simulation steps, will be covered to best equip the thermal engineer to effectively use simulation to aid and guide the demanding task of reliable system design.

  • Simulating Vehicle HVAC Systems
    Workshop, Doubletree Suites Chicago-Downers Grove, Downers Grove, United States, December 15, 2016

    This workshop will showcase various software tools, models, and coupling techniques used by today’s engineers to achieve better design, faster. Ranging from fast and efficient CFD "pre-thru post-processing" in STAR-CCM+® software, to more advanced modeling such as de-ice/defog and cabin heatup/cool down simulation. You will also learn about 1D-3D system simulation coupling, as well as the exciting possibilities design exploration/optimization can bring to the design process.

  • Automotive Lighting - A Spotlight on Solar Radiation
    Online Event, December 14, 2016

    This web seminar will focus on the simulation of solar radiation and its impact on hot spots and resulting maximum temperatures.

  • How to add CFD into a fluid mechanics course
    Online Event, December 13, 2016

    Penn State professor John M. Cimbala, co-author of Fluid Mechanics: Fundamentals and Applications, will demonstrate how tutorial materials and videos can be combined with engineering simulation software to increase the understanding of basic CFD concepts while also enhancing students’ knowledge about fluid flow. Using class-tested materials and homework samples, Professor Cimbala will highlight proven teaching methods to prepare students for basic CFD modeling.

  • Hands-on Workshop on Computational Fluid Dynamics
    Workshop, DEE, National Institute of Technology, Tiruchirappalli, India, December 12, 2016

    This course will provide core knowledge on the fundamentals of CFD for engineers, and an introduction to the methods and analysis techniques used in CFD. • It also provides an introduction to the use of commercial CFD codes to analyze internal and external flow heat transfer, multiphase and combustion problems of practical engineering interest.

  • 10days certificate course on "Hydrodynamic stability and dynamo theory"
    Course, National Institute of Technology, warangal, warangal, India, December 9, 2016

    During the course the following topics will be covered Foundations of Magnetohydrodynamics, Dynamics of Rotating Fluids, Numerical Simulations of Dynamos and Natural Dynamos.

  • Admixtus is the time and cost saving solution for mixing engineers
    Online Event, December 9, 2016

    Attendees of this webinar will learn the basics of performing a mixing simulation with Admixtus. A demonstration by a technical expert will show the ease of setting up such a simulation.

  • Computational Fluid Dynamics (CFD) with OpenFOAM
    Course, Department of Mechanical Engineering, VNIT, Nagpur, India, December 8, 2016

    The objective of the present training program is to appreciate the open source CFD code OpenFOAM and simplify OpenFOAM use. This training gives a platform to the participant to understand OpenFOAM from basics to advanced to programming level. 

  • HPDC Webinar Series: Part III - Cooling & Solidification
    Online Event, December 8, 2016

    In Part III of our High Pressure Die Casting webinar series, we will explore cooling and solidification simulations.

  • Web Seminar: ECS & Ducted Air Systems CFD Simulation - Modeling Complex System Interactions
    Online Event, December 7, 2016

    Modeling sub-system interactions of a full aerospace aircraft management system during operation using Thermo-fluid 1D-CFD simulation.

  • Advanced diploma on CFD analysis -300 hours Inhouse programme
    Course, Niharika Institute of Computational Engineering, Bangalore, India, December 1, 2016

    Course offered in two levels(level 01 and Level 02).Admission to level 02 is only for those who successfully completes level 01. Please visit our website for more details. http://nicecfd.com/advanced-diploma-on-cfd-analysis.php Classes - about 5 hours perday (Theory + practicals).Theory most probably from 5 PM to 7 PM (Monday to saturday)

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 4 hours per day , Lab/practical training 4 hours per day.

November, 2016
  • LES4ICE'16
    Conference, Rueil-Malmaison (near Paris), France, November 30, 2016

    Large-Eddy Simulation for Internal Combustion Engines 2016

  • CFD Day – Simulation Makes the Difference
    Seminar, Via Luigi Beccali, 4, MIlan, Italy, November 30, 2016

    Free seminar in Milan, Italy. It is the first event in Italy fully dedicated to CFD techniques and methodologies for industry.

  • CFD Day 2016
    Seminar, Via Lugi Beccali, 4, Milan, Italy, November 30, 2016

    The role of thermal analysis in electronic design and in complex fluid systems

  • Symposium on Innovative Simulations in Turbomachinery
    Conference, SORAT Insel-Hotel, Regensburg, Germany, November 28, 2016

    Invitation & Call for Presentations open: The symposium on 28 & 29 November 2016 in Regensburg, Germany, will offer a forum on innovative simulation technology for all areas of turbomachinery.

  • Turbocharger Design
    Course, United States, November 28, 2016

    Our turbocharger design training will go over the theoretical knowledge required to design, analyze and optimize radial turbines and centrifugal compressors as well as how to match them together.

  • Lloyd's Register's workshop on ship scale hydrodynamic computer simulation
    Workshop, Lloyd’s Register's Global Technology Centre, Southampton, United Kingdom, November 25, 2016

    Lloyd’s Register is hosting a ship scale hydrodynamics simulation workshop on 25 November 2016, at their Global Technology Centre in Southampton.

  • Why Data Analytics with Hadoop is the Future
    Online Event, November 22, 2016

    A webinar on "Why Data Analytics with Hadoop is the Future, which is scheduled on 22nd November, 2016 at 9:00 PM.

  • Axial and Centrifugal Pumps Design
    Course, United States, November 21, 2016

    For the purposes of this online course, we will be focusing on what axial, radial and mixed-flow pumps are, how they work, what their place is in thermodynamic cycles, how to design them and so on.

  • Computational Fluid Dynamics (CFD) with OpenFOAM
    Course, Department of Mechanical Engineering, VNIT, Nagpur, India, November 19, 2016

    The objective of the present training program is to appreciate the open source CFD code OpenFOAM and simplify OpenFOAM use. This training gives a platform to the participant to understand OpenFOAM from basics to advanced to programming level. 

  • Introducing the major new functionalities in TURBOdesign Suite v6.2
    Online Event, November 17, 2016

    The version 6.2 update to TURBOdesign Suite provides significant new features and functionality to enable designers to produce highly optimized designs faster than ever before.

  • Introducing the major new functionality enabled in TURBOdesign Suite v6.2 for multi-disciplinary optimization of turbomachinery
    Online Event, November 17, 2016

    Register to see how the new features and enhancements in TURBOdesign Suite 6.2 enable turbomachinery engineers to produce breakthrough high-efficiency designs faster than ever before.

  • A Guide to High-Fidelity CFD for Industry
    Seminar, Falcon Hotel, Stratford upon Avon, United Kingdom, November 16, 2016

    NAFEMS is excited to announce this one day seminar, exploring the role of Grid Generation, HPC and Turbulence Modelling. Presentations will be made by leading industry and academic experts, including representation by Jaguar Land Rover, Frazer Nash, Dyson and EDF Energy. A full agenda and registration can be found on the NAFEMS website at https://www.nafems.org/events/nafems/2016/guide-to-high- fidelity-cfd-for-industry/.

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 4 hours per day , Lab/practical training 4 hours per day.

  • HPDC Webinar Series: Part II - Filling
    Online Event, November 15, 2016

    In Part II of our High Pressure Die Casting webinar series, we will explore filling simulations.

  • Expert course: Computational Fluid Dynamics (CFD) for maritime applications
    Course, Haagsteeg 2, Wageningen, Netherlands, November 14, 2016

    MARIN organises an expert course designed to reflect the latest experience in the application of Computational Fluid Dynamics (CFD) for ship design, offshore engineering and renewable energy applications. To obtain reliable and accurate CFD results for these applications, application-specific choices and ‘best practice’ will be presented.

  • Sunday batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),13-November-2016 (12 full Sundays)
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 13, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.

  • International Conference on Computer Science , Engineering and Applied Science ( ICCSEAS 2016 )
    Conference, Namba Oriental Hotel, 2-8-17 Sennichimae, Chuo Ward, Osaka, Japan, November 11, 2016

    The ICCSEAS 2016 Conference offers a great opportunity to bring together professors, researchers, Scientists, Engineers, Academician and scholars around the globe a great platform to deliver the latest innovative research result and the most recent development and trends in Computer Science , all kinds of engineering and applied sciences field

  • Annual Meeting on Rheology
    Conference, Meliá Alicante, Alicante, Spain, November 10, 2016

    Rheology 2016 is a scientific gathering that guarantees the offering, thoughts and ideas which will enable and secure you the theme "Prism of Possibilities and Potentialities to Illuminate Rheology Science''. It provides a premier technical forum for reporting and learning about the latest research and development, as well as for launching new applications and technologies.

  • TRAINING: Internal Combustion Engine Modeling in CONVERGE
    Course, 21500 Haggerty Road, Suite 120, Livonia, United States, November 9, 2016

    This ​two-day ​course ​offers ​an ​introduction ​to ​ CONVERGE ​v2.3 ​for ​ internal ​combustion ​(IC) ​engine ​modeling. ​You ​will ​ learn ​about ​the ​ CONVERGE ​solver ​and ​modeling ​options ​while ​working ​ through ​a ​ typical ​IC ​engine ​case ​from ​start ​to ​finish. ​

  • Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS.
    Course, Chalmers University of Technology, Gothenburg, Sweden, November 9, 2016

    A three-day course

  • AxSTREAM Workshop - Boston, MA,
    Course, Boston, United States, November 9, 2016

    This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery equipment using the AxSTREAM® software platform.

  • 14th Multiphase Flow Workshop - Short Course and Conference
    Conference, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany, November 8, 2016

    Multiphase flows are of great interest to a large variety of industries. The power generation, nuclear reactor technology, food production, chemical process, aerospace and automotive industries are all driving forces in this complex field. The goal of the workshop is to bring together experimental and numerical practitioners, and to foster discussion and exchange of knowledge. Experts from both areas are called upon to present their research and application results to a worldwide audience.

  • Mixing In Stirred Tanks - Live One Day Training - Dublin, Ireland, November 08, 2016
    User Conference, New Horizons Ireland, Ireland, November 8, 2016

    The course will review principles of mixing in stirred tanks, provide recommendations for process design and scale-up, plus enable participants to apply these principles and recommendations to their mixing processes/problems.

  • FloEFD Simulation Conference 2016
    Conference, Frankfurt Marriott Hotel, Frankfurt, Germany, November 8, 2016

    FloEFD combines the product design and validation steps in one loop it allows engineers to keep pace with rapid design changes. The conference is a unique opportunity to meet and network with other FloEFD users and exchange information. It is also an excellent platform to talk directly to the FloEFD development team and get first- hand information regardless of whether you’re already using FloEFD or considering adopting its use.

  • AxCYCLE for Organic Rankine Cycle Training Course
    Course, 1500 District Avenue, Burlington, United States, November 8, 2016

    This online-based training course provides participants with the knowledge to perform Organic Rankine Cycles (ORC) design, analysis and optimization.

  • TRAINING: Surface Preparation with CONVERGE
    Course, 21500 Haggerty Road, Suite 120, Livonia, United States, November 7, 2016

    This ​course ​offers ​an ​introduction ​to ​surface ​ preparation ​in ​CONVERGE ​ Studio ​v2.3.

  • International Conference on Computational Physics, Mathematics and It’s Application ( ICCPMA 2016 )
    Conference, Keio Plaza Hotel, 2-2-1 Nishi-Shinjuku, Shinjuku-Ku, Tyoko, Japan, November 7, 2016

    bring together computational scientists, leading academics, researchers and research scholars to exchange and share their experiences and research results about all aspects of Computational Physics and Mathematics

  • ERCOFTAC-High Order Methods for Industrial CFD, 3-4 Nov 2016, NUMECA, Brussels, Belgium
    Course, NUMECA, BRUSSELS, Belgium, November 3, 2016

    Aims:Assess how HOM could impact general Industrial CFD in the near future. Although the impact of HOM for RANS simulations has still to be confirmed, the impact on unsteady simulations, such as LES/DNS is already considered as significant. Applications and methods are offered. Also, how HOM can deliver higher accuracy, in shorter timescales, thence, evaluate the potential of HOM. Q&A sessions ensure the knowledge and techniques provided are well observed, leading to capability in implementation.

  • ERCOFTAC - Best Practices in Combustion CFD - I.C. Engines, 2-3 Nov 2016, TU Darmstadt, Germany
    Course, TU Darmstadt, Darmstadt, Germany, November 2, 2016

    Design and operation of modern combustion I.C engines faces the need of combining high efficiency with low pollutants emissions. CFD has become a powerful tool in this sector. Many models exist, each having a range of applicability, computational cost and accuracy. Thus, CFD experts involved in I.C. Engine simulations, given usual CFD skills, need specific insight and knowledge in spray and combustion modelling, in order to conduct thorough analysis. The present course addresses this need.

  • Learn CFD with OpenFOAM
    Course, Chinchwad, Pune, India, November 2, 2016

    Course Overview It is a balanced course for a beginner in CFD Field The important prospect of this course, it allows the participant to built up their understanding in all the aspect to OpenFOAM as a general-purpose CFD Solver. More than half of the time will be devoted on hands-on sessions

  • Aerospace ECS – Thermo-Fluid System Simulation of Air Cycle Machines and Bleed Air Systems
    Online Event, November 2, 2016

    Thermo-fluid system simulation of air cycle machines and bleed air systems in an aerospace air management systems using 1D Computational Fluid Dynamics (CFD).

  • Advanced diploma on CFD analysis -300 hours Inhouse programme
    Course, Niharika Institute of Computational Engineering, Bangalore, India, November 1, 2016

    Course offered in two levels(level 01 and Level 02).Admission to level 02 is only for those who successfully completes level 01. Please visit our website for more details. http://nicecfd.com/advanced-diploma-on-cfd-analysis.php Classes - about 5 hours perday (Theory + practicals).Theory most probably from 5 PM to 7 PM (Monday to saturday)

  • fast Track Batch on CFD with OpenFOAM
    Course, Chinchwad, Pune, India, November 1, 2016

    This course is for you, if you are: New to OpenFOAM || You have partial training in OpenFOAM || Want to develop proficiency in CFD / OpenFOAM || Want to simplify the use of OpenFOAM || PG Student, Research Scholar, starting career in CFD || R&D person either in industry / lab etc

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 3 hours per day.

October, 2016
Pages:

1    2    3    4    5    6    7    8    9    10    11    12    13    14    15    16    17    18    19    20    21    22    23    24    25    26    27    Next   

[Back to Events Calendar Front Page]