CFD Online Logo CFD Online URL
Home > Forums > Mesh Generation & Pre-Processing Software > ANSA

ANSA mesh quality report

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   December 14, 2012, 12:14
Default ANSA mesh quality report
New Member
Matthew Bondy
Join Date: Dec 2012
Posts: 1
Rep Power: 0
bondmatt is on a distinguished road
Hello all,

I am new to ANSA and I have run into a small problem. I would greatly appreciate any assistance. I can run a check of my mesh and ANSA seems to do this quite well. The documentation is good and I like the many options. However, when I produce a report (D. INFO, deck info? under D.UTIL) many of the metrics to assess the mesh are not shown in the final report even if I select them in both the mesh quality check and for the report. Am I missing something?

Thank you,
bondmatt is offline   Reply With Quote

Old   December 16, 2012, 17:52
Senior Member
Vangelis Skaperdas
Join Date: Mar 2009
Location: Thessaloniki, Greece
Posts: 286
Rep Power: 19
vangelis is on a distinguished road
Hi there,

Please check that in the D,INFO window
you change the option from Current Tab to All Tabs
so that ANSA reports the information you have activated
for all three tabs.

Could that be the issue?

vangelis is offline   Reply With Quote

Old   February 18, 2013, 07:35
Default ansa software
New Member
Join Date: Dec 2011
Posts: 1
Rep Power: 0
mihirchawda is on a distinguished road
I am willing to learn and use ANSA meshing software.I tried to find out the demo version of it, but i didn't succeed.

So requesting all to send me link from where i can download demo version of ANSA.

mihirchawda is offline   Reply With Quote


ansa, mesh quality

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[ICEM] Using Surface Mesh from ANSA for Fluent Sim tommymoose ANSYS Meshing & Geometry 15 March 3, 2016 18:29
quality of the mesh u k jha ANSYS Meshing & Geometry 1 May 6, 2009 14:44
mesh quality: urgent Madhukar Rapaka FLUENT 2 June 8, 2006 10:43
Gambit Mesh quality TOM FLUENT 1 February 8, 2002 08:00

All times are GMT -4. The time now is 06:14.