Orthogonality of cell check

nkjsimulating · October 10, 2013, 03:30

I am a new user of ANSA and using 13.2.4 version.After importing mesh from ANSA to fluent, I check skewness and orthogonality in fluent as a preliminary criteria for the CFD analysis.

Is it possible to check the orthogonality of cell in ANSA ??

vangelis · October 11, 2013, 08:59

Hi there,

In ANSA v13.2.4 you can check for Fluent aspect, skewness, squish, angle etc
but Fluent Orthogonality check has only been added in ANSA in v14.x series

I suggest you download the latest version v14.2.1

Best regards,

Vangelis

nkjsimulating · October 12, 2013, 04:43

Thanks Vangelis

vangelis · October 14, 2013, 05:57

You are welcome!

Rameshus · November 24, 2013, 09:53

hi nkjsimulating..
i want to know how to export the Ansa file as .mesh file....
I did the CFD tetra mesh for pipe bending and i export as .msh file without setting the BC in Ansa. Then i imported it in fluent i got the error as INVALID MESH..

vangelis · November 24, 2013, 14:29

http://www.cfd-online.com/Forums/ans...tml#post463303

Rameshus · November 26, 2013, 10:31

hi vangelis,

Thanks for ur timely reply

October 10, 2013, 03:30	Orthogonality of cell check	#1
nkjsimulating New Member Niraj Join Date: Jul 2013 Location: Germany Posts: 15 Rep Power: 12	I am a new user of ANSA and using 13.2.4 version.After importing mesh from ANSA to fluent, I check skewness and orthogonality in fluent as a preliminary criteria for the CFD analysis. Is it possible to check the orthogonality of cell in ANSA ??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cell Reynolds Number	laliong	Main CFD Forum	12	September 17, 2019 03:18
Y and Cell Aspect Ratio	gdbaldw	OpenFOAM Running, Solving & CFD	11	December 6, 2016 11:58
[General] 2 datas on one plot	Akuji	ParaView	46	December 1, 2013 14:06
HELP! grid check failed in parallel fluent	restart	FLUENT	0	March 5, 2011 09:55
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

October 11, 2013, 08:59		#2
vangelis Senior Member Vangelis Skaperdas Join Date: Mar 2009 Location: Thessaloniki, Greece Posts: 287 Rep Power: 21	Hi there, In ANSA v13.2.4 you can check for Fluent aspect, skewness, squish, angle etc but Fluent Orthogonality check has only been added in ANSA in v14.x series I suggest you download the latest version v14.2.1 Best regards, Vangelis

October 12, 2013, 04:43		#3
nkjsimulating New Member Niraj Join Date: Jul 2013 Location: Germany Posts: 15 Rep Power: 12	Thanks Vangelis

October 14, 2013, 05:57		#4
vangelis Senior Member Vangelis Skaperdas Join Date: Mar 2009 Location: Thessaloniki, Greece Posts: 287 Rep Power: 21	You are welcome!

November 24, 2013, 09:53		#5
Rameshus New Member Ramesh Join Date: Nov 2013 Posts: 10 Rep Power: 12	hi nkjsimulating.. i want to know how to export the Ansa file as .mesh file.... I did the CFD tetra mesh for pipe bending and i export as .msh file without setting the BC in Ansa. Then i imported it in fluent i got the error as INVALID MESH..

November 24, 2013, 14:29		#6
vangelis Senior Member Vangelis Skaperdas Join Date: Mar 2009 Location: Thessaloniki, Greece Posts: 287 Rep Power: 21	http://www.cfd-online.com/Forums/ans...tml#post463303

November 26, 2013, 10:31		#7
Rameshus New Member Ramesh Join Date: Nov 2013 Posts: 10 Rep Power: 12	hi vangelis, Thanks for ur timely reply