|
[Sponsors] |
January 20, 2013, 09:03 |
Hex mesh of a gasket
|
#1 |
New Member
Wojciech
Join Date: Jan 2013
Posts: 2
Rep Power: 0 |
Hello,
How can I achive a regular hex mesh of gasket in ansys workbench 14 ? Something like this ? http://www.swiat-szkla.pl/images/art...009_04/247.png An list of settings and steps would be the best answer. Thanks in advance. |
|
January 20, 2013, 10:28 |
|
#3 |
New Member
Wojciech
Join Date: Jan 2013
Posts: 2
Rep Power: 0 |
No problem I can try in ICEM although im affraid there will be a problem importing the whole assembly into ICEM becouse it was done in autodesk inventor :/
If there is no other way i can remake it in a different program but which one ? Here is a screen of the assembly with a meshing made by me: |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[blockMesh] --> FOAM FATAL ERROR: Trying to specify a boundary face | A.A. | OpenFOAM Meshing & Mesh Conversion | 41 | June 26, 2020 07:06 |
Mesh motion with Translation & Rotation | Doginal | CFX | 2 | January 12, 2014 06:21 |
[snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
[blockMesh] apparently the mesh doesn't want to be created in one direction | Maxime Thomas | OpenFOAM Meshing & Mesh Conversion | 1 | August 18, 2012 06:05 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |