[ICEM] Connecting of Blocks

FrankW · May 14, 2012, 19:10

Hi at all,

i have a fluid channel with some build-in components. Because of the complicated structure I've generate the blocks of the middle section first. After that I've the channels filled in with blocks. And now I've 2 connecting zones and I don't know the right way to connect the blocks together.

This zone is located between the cylinder shaped form and the rectangular shaped form. Any hint is welcome!
Additional I can send you the geometry and blocking files (210KB zip).

Thank you very much in advance!

Best Greetings
Frank

Far · May 14, 2012, 23:38

Merge vertices....

FrankW · May 15, 2012, 03:48

... This was also my first idea. Unfortunately, I don't know which are the right ones. It's a fu**ing problem of geometry.

Sorry, I ponder about it for several days.
Do you have time to take a quick look at the files?

Far · May 15, 2012, 03:58

Ok. Send them

PSYMN · May 15, 2012, 11:05

You can only merge verts to join the blocks if the topology where the blocking meets is the same...

In other words, if you have an ogrid on one side, you need an ogrid on the other side to merge...

Other wise, just use a non-conformal mesh interface in your solver.

May 14, 2012, 23:38		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,490 Blog Entries: 6 Rep Power: 48	Merge vertices.... PSYMN likes this.

May 15, 2012, 11:05		#5
PSYMN Retired from CFD Online Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,665 Blog Entries: 1 Rep Power: 40	You can only merge verts to join the blocks if the topology where the blocking meets is the same... In other words, if you have an ogrid on one side, you need an ogrid on the other side to merge... Other wise, just use a non-conformal mesh interface in your solver. BrolY likes this. __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fluent3DMeshToFoam	bego	OpenFOAM	28	April 16, 2018 10:22
converting Fluent mesh to openfoam standard mesh	deepesh	OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...	31	March 29, 2017 06:59
dsmcInitialise - dsmcFoam	archymedes	OpenFOAM Pre-Processing	94	July 15, 2016 17:14
help needed: connecting 2 blocks	Lexa	OpenFOAM Native Meshers: blockMesh	4	November 20, 2009 06:47
Connecting blocks with multi-blocks methods	Sebastien Perron	Main CFD Forum	3	March 7, 2001 17:55

May 15, 2012, 03:48		#3
FrankW Member Frank Weise Join Date: Mar 2009 Location: Germany Posts: 43 Rep Power: 11	... This was also my first idea. Unfortunately, I don't know which are the right ones. It's a fu**ing problem of geometry. Sorry, I ponder about it for several days. Do you have time to take a quick look at the files?

May 15, 2012, 03:58		#4
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,490 Blog Entries: 6 Rep Power: 48	Ok. Send them