[DesignModeler] Modifying Parasolid Files in DM

peterputer · June 20, 2012, 06:50

Hej,
I ve got a Parasolid File out of a CAD model which i imported in Design Modeler. Is there any possibility to change geometry of that imported file, like adjusting lines etc?
Regards

Far · June 20, 2012, 07:41

This can be done easily in spaceclaim. If you can send files / connect through my teamviewer and change files yourself. But this can be done easily in dm...

peterputer · June 20, 2012, 07:56

I can change the parasolid in UG NX as well, but then i ve to export it as a parasolid file and import it as a new geometry in DM again, so that i ve new bodies and ve to start my simulation from scratch.
So i ve to modify my parasolid model in DM :/

peterputer · June 20, 2012, 09:07

Ok i solved it, if i select the face of the parasolid model and click sketch afterwards, it generates a sketch on that surface and i can at least select lines of that face. enough for my purposes.
Regards

Far · June 20, 2012, 09:08

then spaceclaim should be the only choice. Is is coupled with ANSYS

peterputer · June 20, 2012, 09:29

Ok i googled spaceclaim didnt know about it. Seems to be pretty useful, anyway for what i needed i found a work around, which fits my needs.
Ty anyway

June 20, 2012, 06:50	Modifying Parasolid Files in DM	#1
peterputer New Member Join Date: Mar 2012 Posts: 27 Rep Power: 14	Hej, I ve got a Parasolid File out of a CAD model which i imported in Design Modeler. Is there any possibility to change geometry of that imported file, like adjusting lines etc? Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF issue	MASOUD	Fluent UDF and Scheme Programming	14	December 6, 2012 13:39
critical error during installation of openfoam	Fabio88	OpenFOAM Installation	21	June 2, 2010 03:01
OF 1.6 \| Ubuntu 9.10 (64bit) \| GLIBCXX_3.4.11 not found	piprus	OpenFOAM Installation	22	February 25, 2010 13:43
Problems in compiling paraview in Suse 10.3 platform	chiven	OpenFOAM Installation	3	December 1, 2009 07:21
OpenFOAM15 paraFoam bug	koen	OpenFOAM Bugs	19	June 30, 2009 10:46

June 20, 2012, 07:41		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	This can be done easily in spaceclaim. If you can send files / connect through my teamviewer and change files yourself. But this can be done easily in dm...

June 20, 2012, 07:56		#3
peterputer New Member Join Date: Mar 2012 Posts: 27 Rep Power: 14	I can change the parasolid in UG NX as well, but then i ve to export it as a parasolid file and import it as a new geometry in DM again, so that i ve new bodies and ve to start my simulation from scratch. So i ve to modify my parasolid model in DM :/

June 20, 2012, 09:07		#4
peterputer New Member Join Date: Mar 2012 Posts: 27 Rep Power: 14	Ok i solved it, if i select the face of the parasolid model and click sketch afterwards, it generates a sketch on that surface and i can at least select lines of that face. enough for my purposes. Regards

June 20, 2012, 09:08		#5
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	then spaceclaim should be the only choice. Is is coupled with ANSYS

June 20, 2012, 09:29		#6
peterputer New Member Join Date: Mar 2012 Posts: 27 Rep Power: 14	Ok i googled spaceclaim didnt know about it. Seems to be pretty useful, anyway for what i needed i found a work around, which fits my needs. Ty anyway