|
[Sponsors] |
June 21, 2012, 06:41 |
2 Bodies with own Mesh
|
#1 |
New Member
Alex
Join Date: Jun 2012
Posts: 4
Rep Power: 13 |
Hey guys,
(got Ansys workbench 14) i would like to make 1 Body sperated in some parts (in example 2). I extruded 2 sketches and made them frozen. Then i used Form new Part. So both parts should be one. I'll do some stuff with fluent after and fluent should interpret this as 1 Body. I've done this cause i want to use the Surface of the smaller square as an inlet. Futhermore i want to have more cells in the smaller square. Hope this way is corret? Or are the other better soultions to do this? Hope i made this clear . Already read so much Manuals and searched at google but didnt found something usefull ) Nevermind got new Problem: I got 2 two cubes/Parts of my Bodiy and make them as fluid for my fluent. The smaller cube getting his own interior and his own walls, which i dont want cause both cubes should be handled as one. Any help? If i make them both as solid, i just get 1 wall and interior.... but i want fluids.. what exactly change at all if i change fluid/solid in design modeler? Thanks guys Last edited by Alex44; June 21, 2012 at 10:13. |
|
June 23, 2012, 15:36 |
|
#2 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
Sorry, not sure what your revised question is asking for...
If you want two fluid zones in one multi-body part, the mesher will make sure the mesh is conformal, but it will still have an interface surface between the two zones.
__________________
----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey |
|
June 25, 2012, 07:23 |
|
#3 |
New Member
Alex
Join Date: Jun 2012
Posts: 4
Rep Power: 13 |
Hey ok, forgot all things i said.
made new example and i hope this will make it clear: what i've done: as you can see iam getting 2 cell zone conditions, which i dont want - i want 1. The body i created should be treated as 1 body. Same with the walls (2 walls , 3 interiors). Can someone help? Thanks!! i already managed to do this but cant reproduce.. Last edited by Alex44; June 25, 2012 at 07:51. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 07:41 |
Converting Starccm+ mesh | Ladnam | OpenFOAM | 0 | September 14, 2011 07:30 |
Meshing aifoil in ICEM | student123a | ANSYS Meshing & Geometry | 13 | December 8, 2010 11:40 |
2d irregular grid | Remy | Main CFD Forum | 1 | December 22, 2008 05:49 |
basic of mesh refinement | arya | CFX | 4 | June 19, 2007 13:21 |