CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[GAMBIT] length of recirculation zone

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 25, 2012, 05:40
Default length of recirculation zone
  #1
abc
New Member
 
abc
Join Date: Jun 2012
Posts: 4
Rep Power: 13
abc is on a distinguished road
hi,
i was examining the velocity flow pattern and recirculation zones in a t-junction with two different meshing(one a coarser one and the other is the finer one) in fluent. But i am facing a problem in fluent that the length of recirculation zone with coarser grid is more reasonable than that with finer grid at same reynolds number. All the operating conditions as well as grid parameters have been kept same except the extent of meshing(fine and coarse). Please help me out.
abc is offline   Reply With Quote

Old   June 26, 2012, 04:12
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41
-mAx- will become famous soon enough
are your y+ still ok with fine grid?
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem Attesz OpenFOAM Meshing & Mesh Conversion 12 May 2, 2013 11:52
[Technical] length of recirculation zone abc OpenFOAM Meshing & Mesh Conversion 0 June 25, 2012 05:36
[ICEM] Export ICEM mesh to Gambit / Fluent romekr ANSYS Meshing & Geometry 1 November 26, 2011 13:11
Problem in running ICEM grid in Openfoam Tarak OpenFOAM 6 September 9, 2011 18:51
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08


All times are GMT -4. The time now is 09:06.