CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Hybrid mesh (https://www.cfd-online.com/Forums/ansys-meshing/104297-hybrid-mesh.html)

niablis July 30, 2016 15:23

Hi Cyln,

Try saving the hex mesh blocking, then creating the unstructured tetra mesh. Once the tetra mesh is complete, use File-->Mesh-->Load from Blocking,select your saved hex mesh blocking and opt for merging the mesh. Then run through the process of merging the surface mesh parts.

Hope that helps!!

cyln July 31, 2016 08:38

Thanks Niablis, it works..


All times are GMT -4. The time now is 05:37.