CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Some hints required on blocking geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 15, 2012, 03:06
Default Some hints required on blocking geometry
  #1
New Member
 
Join Date: Jul 2012
Posts: 9
Rep Power: 13
air_engineer_arsenal is on a distinguished road
Previously I learned about the blocking topology of swept wing from Far and no now I have to learn about the blocking of F6 Wing with fuselage. I now the same blocking topology will work fine for this case but I am confused how O-grid or C-grid will be inserted in this case. Some tips and advices required on how to insert C-grid and where to make splits in the C-grid for good blocking. I am attaching the .prj file with the post. Thanks in advance.

Regards
Attached Files
File Type: zip F6.zip (4.7 KB, 5 views)
air_engineer_arsenal is offline   Reply With Quote

Old   August 15, 2012, 08:52
Default
  #2
Far
Super Moderator
 
Sijal
Join Date: Mar 2009
Location: Islamabad
Posts: 4,553
Blog Entries: 6
Rep Power: 54
Far has a spectacular aura aboutFar has a spectacular aura about
Send a message via Skype™ to Far
Quote:
Previously I learned about the blocking topology of swept wing from Far
In fact, original ideas are due to Simon.
Far is offline   Reply With Quote

Old   August 15, 2012, 08:56
Default
  #3
Far
Super Moderator
 
Sijal
Join Date: Mar 2009
Location: Islamabad
Posts: 4,553
Blog Entries: 6
Rep Power: 54
Far has a spectacular aura aboutFar has a spectacular aura about
Send a message via Skype™ to Far
Zip file only contains the .prj (project file). You need to attach the .tin file at least.
Far is offline   Reply With Quote

Old   August 15, 2012, 15:14
Default
  #4
Senior Member
 
Join Date: Mar 2011
Location: Germany
Posts: 552
Rep Power: 20
cfd seeker is on a distinguished road
Quote:
Originally Posted by Far View Post
Zip file only contains the .prj (project file). You need to attach the .tin file at least.
.tin size was of large size that's why I only attached .prj file but what's the point? If you open project file into ICEM it just behave like .tin file after opening so that you can make any changes to it isn't it?
cfd seeker is offline   Reply With Quote

Old   August 15, 2012, 16:15
Default
  #5
siw
Senior Member
 
Stuart
Join Date: Jul 2009
Location: Portsmouth, England
Posts: 731
Rep Power: 25
siw will become famous soon enough
If you go to the ANSYS Customer Portal there is a PDF file in the tutorials section for version 11, in it is a tutorial for blocking an aircraft similar to the F6. That might help you.
siw is online now   Reply With Quote

Old   August 15, 2012, 16:53
Default
  #6
Far
Super Moderator
 
Sijal
Join Date: Mar 2009
Location: Islamabad
Posts: 4,553
Blog Entries: 6
Rep Power: 54
Far has a spectacular aura aboutFar has a spectacular aura about
Send a message via Skype™ to Far
Quote:
Originally Posted by cfd seeker View Post
.tin size was of large size that's why I only attached .prj file but what's the point? If you open project file into ICEM it just behave like .tin file after opening so that you can make any changes to it isn't it?
Are you air_engineer_arsenal Admin plz don't allow double accounts from same IP
Far is offline   Reply With Quote

Old   August 16, 2012, 12:58
Default
  #7
Super Moderator
 
diamondx's Avatar
 
Ghazlani M. Ali
Join Date: May 2011
Location: Tokyo, Japan
Posts: 1,385
Blog Entries: 23
Rep Power: 28
diamondx will become famous soon enough
what is going on here !!!!!
__________________
Regards,
New to ICEM CFD, try this document --> https://goo.gl/KAOIwm
Ali
diamondx is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Using Blocking with ICEM (infinite blocking lines appeared) Touré ANSYS Meshing & Geometry 2 August 5, 2012 18:27
[ICEM] Meshing adjacent wall geometry and simple ICEM questions everdimension ANSYS Meshing & Geometry 25 June 20, 2012 05:25
[ICEM] Best way to import geometry ICEM Cottbus ANSYS Meshing & Geometry 4 June 12, 2012 10:42
[ICEM] Cylinder Geometry and Blocking Leepox ANSYS Meshing & Geometry 2 November 21, 2011 11:32
paraFoam reader for OpenFOAM 1.6 smart OpenFOAM Installation 13 November 16, 2009 22:41


All times are GMT -4. The time now is 04:37.