CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Define node distribution on an edge based on an equation in ICEM (https://www.cfd-online.com/Forums/ansys-meshing/106597-define-node-distribution-edge-based-equation-icem.html)

sidd August 13, 2012 16:48

Define node distribution on an edge based on an equation in ICEM
 
Hi,

Is there a way in which you could define node distribution on an edge (in ICEM) using your own function?
For example: I want my nodes on an edge to follow the distribution y=0.0557x+0.2

where y= delta yplus and
x= yplus

I am aware that I could use Linear graph option but I don't know:
a) how to interpret Relative point density
b) and how to define your graph based on an equation.

Thanks in advance.

sidd September 3, 2012 08:02

Define node distribution on an edge based on an equation in ICEM
 
Hi,

Is there a way you could define node distribution on an edge in ICEM using your own equation?

Thanks,
sidd


All times are GMT -4. The time now is 21:49.