CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Room simulation -error-need help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 6, 2012, 13:27
Default Room simulation -error-need help
  #1
Member
 
Join Date: Sep 2012
Location: FL
Posts: 79
Rep Power: 13
victoryv is on a distinguished road
I am modelling a simple case in 3D-A room with multiple stacks in it. The geometry of the room is 5x3x7 and stacks are of 0.5X3X7. The inlet of the air flowing in is at the top with rectangular cross section and outlet is at the bottom of the stacks with mesh like cross section. I have initially drawn the stacks and and the room (as thin object) Later on I used the boolean operation to create the fluid between them( without keeping the tool bodies). I have named the boundaries walls of the room, inlet and outlet. I have 2 problems here

1.When I mesh the fluid using Ansys mesh, it is giving me an error "user input is required before it can be updated"
2, How do I select the faces of the stacks inside the fluid so that I can name them stack walls? I was able to select only the outer (exterior ) faces of the fluid.
victoryv is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rigid body motion error when restarting a terminated FSI simulation lingdeer ANSYS 1 May 19, 2013 02:40
Boundary condition setting regarding turbine simulation using CFX Lacerlacer CFX 11 March 12, 2012 10:32
room airflow simulation jayarvacs Main CFD Forum 0 March 10, 2010 22:01
Replacing mesh while running a simulation akultane CFX 1 November 15, 2009 14:46
Question concerning about the flow simulation of a fan in an engine room. ghlee Main CFD Forum 3 October 21, 1998 08:05


All times are GMT -4. The time now is 05:15.