CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Porous Pipe (https://www.cfd-online.com/Forums/ansys-meshing/107989-porous-pipe.html)

abhaygk October 11, 2012 01:26
Porous Pipe
 
Hi all,

I am using Ansys Workbench 14.0 I want to model a simple pipe with porosity 40%. For modelling this porous pipe what all steps i have to follow..??? Please help me with some suggestions..

Thanks and Regards

Abhay

energy382 October 11, 2012 08:40
Quote:
Originally Posted by abhaygk (Post 386084)
Hi all,

I am using Ansys Workbench 14.0 I want to model a simple pipe with porosity 40%. For modelling this porous pipe what all steps i have to follow..??? Please help me with some suggestions..

Thanks and Regards

Abhay
mesh your geometry, create a porous domain and fluid-porous interface, chose a loss model and terminate porosity settings

Tanjina July 12, 2013 10:09
Porous pipe BC
 
1 Attachment(s)
Hi, I also want to model a 2D porous pipe submerged under water . I used porous jump BC. I am sure what will be the alpha value. and result is like attached image. Could you please help me ?


All times are GMT -4. The time now is 17:29.