CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] OGrid looks weird. (https://www.cfd-online.com/Forums/ansys-meshing/108780-ogrid-looks-weird.html)

foolboy007 November 1, 2012 09:53
OGrid looks weird.
 
1 Attachment(s)
pls look at the pic.

The curved region (where the number 40 is) of Ogrid looks weird.
how to adjust the center square region to gradually grow into a circle?

cfd seeker November 1, 2012 11:02
Everything looks OK to me in this pic...if you are talking about how to enlarge or reduce the size of square block then you can use "Rescale O-grid" command and if your talking about gradual change in mesh size then you can use "Edge params"

diamondx November 1, 2012 11:45
make sure you don't have overlapping blocks...


All times are GMT -4. The time now is 23:40.