[GAMBIT] Meshing problem in GAMBIT

nkme2007 · November 9, 2012, 07:07

I am planning to simulate the heat transfer from water passing through pipes inserted in ceiling of a building. But, while meshing the faces on GAMBIT, some faces are not getting meshed. Can anybody help me with some advice about how to mesh the model attached below? The unmeshed faces are in red.

Please... Help awaited.

Far · November 9, 2012, 07:21

is it closed volume?

nkme2007 · November 9, 2012, 07:40

Quote:

Originally Posted by Far

is it closed volume?

No, it is not a closed volume.. walls and ceiling on their top with water pipes.

Marion · November 9, 2012, 07:54

Hi,

I think your mesh is way too coarse... You should also try to split your volume into smaller, simpler volumes.
Marion.

nkme2007 · November 9, 2012, 10:08

Quote:

Originally Posted by Marion

Hi,

I think your mesh is way too coarse... You should also try to split your volume into smaller, simpler volumes.
Marion.

Marion,

Sorry to ask you again. Can you elaborate since I am new to CFD and this is my first model I am working on?

Far · November 9, 2012, 23:07

can you show us the control volume for this case?

You can edit above pics and roughly draw the control volume in red color around this room.

nkme2007 · November 9, 2012, 23:31

Quote:

Originally Posted by Far

can you show us the control volume for this case?

You can edit above pics and roughly draw the control volume in red color around this room.

Sir,

The Contol Volume is shown in the image attached below. Inside volume of the room 3m X 3m X 3m is in white with 2 windows and 1 door in pink.

-Nithin

Far · November 9, 2012, 23:50

so the white shows the overall domain. With 3*3*3 volume and 1 door and 2 windows. Will you specify the boundary conditions for each wall, ceiling, each window and door seperatly?

nkme2007 · November 9, 2012, 23:57

Quote:

Originally Posted by Far

so the white shows the overall domain. With 3*3*3 volume and 1 door and 2 windows. Will you specify the boundary conditions for each wall, ceiling, each window and door seperatly?

All the Walls will have same boundary conditions..
All the windows and doors have same..
Ceiling will have conditions different from walls and windows...
And Pipes visible on the ceiling are of fibre, that will be first effected due to water temperature, then ceiling and then the walls....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GAMBIT meshing problem for boundary layer	Falah	FLUENT	2	November 30, 2020 14:16
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing	David-CFD	ANSYS Meshing & Geometry	1	April 1, 2011 05:22
Gambit meshing problem	David Banks	Main CFD Forum	0	July 19, 2007 11:48
Problem starting Gambit	ViHAR MALViYA	FLUENT	0	November 10, 2006 10:26
Gambit Meshing Problem	Drew	FLUENT	3	April 1, 2005 10:50

November 9, 2012, 07:21		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	is it closed volume?

November 9, 2012, 07:54		#4
Marion Senior Member Marion Join Date: Jul 2012 Location: France Posts: 122 Rep Power: 14	Hi, I think your mesh is way too coarse... You should also try to split your volume into smaller, simpler volumes. Marion.

November 9, 2012, 23:07		#6
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	can you show us the control volume for this case? You can edit above pics and roughly draw the control volume in red color around this room.

November 9, 2012, 23:50		#8
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	so the white shows the overall domain. With 333 volume and 1 door and 2 windows. Will you specify the boundary conditions for each wall, ceiling, each window and door seperatly?