CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] ICEM Hexa Meshing Butterfly Valve (Structured) (https://www.cfd-online.com/Forums/ansys-meshing/109667-icem-hexa-meshing-butterfly-valve-structured.html)

snpradeep November 23, 2012 05:43
ICEM Hexa Meshing Butterfly Valve (Structured)
 
4 Attachment(s)
Hello..Can anyone help me with meshing a butterfly valve..I want knnow how can I block the geometry in ICEM to get good angles..(Atleast 20 deg)..In current blocking i am getting 1 deg..I am not understanding how to improve it..Please find the enclosed pictures of the same..Awaiting for your suggestions..
Regards,
Pradeep

siw November 23, 2012 06:32
Maybe this topic could help (http://www.cfd-online.com/Forums/ans...fly-valve.html).

Far November 23, 2012 08:58
Will same blocking strategy be used for the all opening settings?

Because the full opening case is very simple to block.

snpradeep November 23, 2012 09:26
Quote:
Originally Posted by Far (Post 393834)
Will same blocking strategy be used for the all opening settings?

Because the full opening case is very simple to block.
Dear Mr. Far,

The valve is always open in my case...

Regards,
Pradeep


All times are GMT -4. The time now is 14:20.