|
[Sponsors] |
[ANSYS Meshing] Cross check marks in my geometry for the mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 25, 2012, 16:15 |
Cross check marks in my geometry for the mesh
|
#1 |
New Member
Ryan Persaud
Join Date: Nov 2012
Posts: 4
Rep Power: 13 |
hey guys hope you can help out with this. After I load my geometry and generated the mesh, there were cross check marks beside the bodies under the geometry part. I attached a picture to show. Any idea why they aren't just normal check marks or can I just ignore them?
Thanks for the help, Ryan mesh cross check mark.jpg |
|
July 24, 2015, 05:55 |
|
#2 |
New Member
Join Date: Jul 2015
Posts: 2
Rep Power: 0 |
Has anyone found the solution to this? I am stuck with the same problem.
|
|
July 26, 2015, 19:00 |
|
#3 |
Senior Member
Join Date: Apr 2014
Location: Melbourne
Posts: 584
Rep Power: 14 |
It means body is meshed!
Click on "mesh" to see your mesh! KAPI |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
[mesh manipulation] TranformPoints gives skewed mesh Possible Bug | andersking | OpenFOAM Meshing & Mesh Conversion | 3 | March 25, 2008 21:33 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |
unstructured vs. structured grids | Frank Muldoon | Main CFD Forum | 1 | January 5, 1999 10:09 |