CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] 3D Geometry in Rhino

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 19, 2012, 10:59
Default 3D Geometry in Rhino
  #1
New Member
 
Siroos Azizmohammadi
Join Date: Oct 2011
Location: Austria
Posts: 17
Rep Power: 0
s_azizmohammadi is on a distinguished road
Hi everybody,

I have a simple 2D geometry (square) in Rhino and want to extrude it in 3D. In 2D model I have a curve which separates two sides of the geometry (2D surface). I creat a solid from 2D surface of my geometry then I extrude the curve to get simple 3D model (say a box with a wall in the middle). when I try to mesh this 3D model in ANSYS, just one side of the wall is meshed, I want to have full mesh for both side of the wall. (see attached files)
Rhino.zip
ANSYS.zip
if I assign material "BODY" manually in ANSYS to both side of the wall it works well, but I want to create it automatically by Rhinoscript then send it to mesher.

any comment would be appreciated in advance.

Siroos
s_azizmohammadi is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 19:42
[DesignModeler] Error while Loading a Geometry JD944 ANSYS Meshing & Geometry 0 October 25, 2011 14:51
[Gmsh] Problem meshing an imported geometry Alicia OpenFOAM Meshing & Mesh Conversion 0 March 30, 2010 04:53
Simulation of Flow through Complex 3D Geometry EmersonKB CFX 5 July 2, 2009 08:17
vitual _ real deneb FLUENT 3 January 22, 2007 04:31


All times are GMT -4. The time now is 17:36.