CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Smooth between faces (https://www.cfd-online.com/Forums/ansys-meshing/111201-smooth-between-faces.html)

astor84 December 31, 2012 10:27
Smooth between faces
 
1 Attachment(s)
Hello,

I'm starting with Gambit. I have to generate a 2D mesh for an annular wing with a fan boundary condition inside. In the attached photo there is one of my first results. I would like to obtain a smooth mesh between faces (no discontinuity in the derivatives across the faces boundary edge). See the red lines for an example. I known it is possible to smooth different faces (as they are a unique face) with ICEM, but I have not a valid licese. Could you help me please?

Thanks

P.S. I'm a beginner with Gambit

-mAx- January 3, 2013 01:57
1 Attachment(s)
maybe by involving more splits
For example one like this Attachment 17942
For the other, you have to try.

astor84 January 3, 2013 09:40
Thank you vaery much for yours suggestion, however I would like to have an automatic, fast and reliable method to smooth the mesh between faces. With ICEM it is very easy.


All times are GMT -4. The time now is 02:06.