|
[Sponsors] |
January 13, 2013, 18:21 |
Advices with this geometry
|
#1 |
Member
Arthur Loginow
Join Date: Aug 2012
Posts: 99
Rep Power: 13 |
Right now i am learning how to use ICEM, what i want is your opinion about this geometry, this is the fluid volume of a twin screw pump, i will have to mesh this geometry and set boundary conditions, the inner faces are the screws so they will have a velocity, the outside faces will be a wall, what i want to know is:
-Will i have trouble creating the boundary conditions? -Is there another option to mesh and create the boundary conditions besides ICEM? I will simulate using FLUENT Thanks. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] need to convert a cell based geometry into STL or CGNS | kamran_kibria | ANSYS Meshing & Geometry | 0 | September 15, 2011 06:14 |
Reg difficulties in meshing the geometry...Urgent | arunraj | ANSYS Meshing & Geometry | 0 | August 27, 2011 00:25 |
2D geometry to 3D geometry | Sgonzalezg | ANSYS Meshing & Geometry | 11 | April 8, 2011 12:02 |
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry | villier | OpenFOAM Meshing & Mesh Conversion | 17 | June 15, 2010 20:51 |
[GAMBIT] import terrain geometry | cfdworker | ANSYS Meshing & Geometry | 2 | May 24, 2009 22:40 |