[ICEM] Export Geometry from the ICEM

asal · January 21, 2013, 09:54

Hello everyone.

I have import a geometry from a cad file to ICEM to made some modification.
then I export the geometry as .IGS and or .STL
but there is something strange here!! when I want t import again this exported geometry, then the only surfaces which I made in ICEN (the surfaces which are created in the modify process) will open and the other surfaces which are originally created vanished! So I have just the surfaces and curves which I built in ICEM and not builted by CAD file.
hopefully I can explain what is going on.

Is any body has any idea about the case?

Far · January 21, 2013, 10:49

Export in step and parasolid. And import both and see what you get.

asal · January 21, 2013, 15:46

Hello and thanks for your reply
In the ICEM, you cannot export to step file! how can I do that?

for exporting in Parasolid format I got this error:

ICEM CFD - Parasolid Writer 12.0.1 (Build 9.4.10.16)
Parasolid Kernel Version 19.1 (Build 307)
Copyright (C) 2009 Ansys Inc./ICEM CFD Engineering

Checking for License...Failed.
child process exited abnormally
Done.

asal · February 3, 2013, 06:54

Any Idea?!

Far · February 3, 2013, 08:01

it look likes a license issue.

January 21, 2013, 09:54	Export Geometry from the ICEM	#1
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Hello everyone. I have import a geometry from a cad file to ICEM to made some modification. then I export the geometry as .IGS and or .STL but there is something strange here!! when I want t import again this exported geometry, then the only surfaces which I made in ICEN (the surfaces which are created in the modify process) will open and the other surfaces which are originally created vanished! So I have just the surfaces and curves which I built in ICEM and not builted by CAD file. hopefully I can explain what is going on. Is any body has any idea about the case?

January 21, 2013, 15:46		#3
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Hello and thanks for your reply In the ICEM, you cannot export to step file! how can I do that? for exporting in Parasolid format I got this error: ICEM CFD - Parasolid Writer 12.0.1 (Build 9.4.10.16) Parasolid Kernel Version 19.1 (Build 307) Copyright (C) 2009 Ansys Inc./ICEM CFD Engineering Checking for License...Failed. child process exited abnormally Done. Last edited by asal; February 3, 2013 at 06:52.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ICEM export mesh	Youen	ANSYS Meshing & Geometry	34	April 23, 2017 12:15
[ICEM] ICEM changes geometry	mariusk87	ANSYS Meshing & Geometry	14	June 20, 2012 08:52
[ICEM] Meshing adjacent wall geometry and simple ICEM questions	everdimension	ANSYS Meshing & Geometry	25	June 20, 2012 04:25
[ICEM] Best way to import geometry ICEM	Cottbus	ANSYS Meshing & Geometry	4	June 12, 2012 09:42
Exporting geometry from Solidworks to ICEM!	Usman	CFX	1	November 27, 2007 16:20

January 21, 2013, 10:49		#2
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	Export in step and parasolid. And import both and see what you get.

February 3, 2013, 06:54		#4
asal Senior Member Astio Lamar Join Date: May 2012 Location: Pipe Posts: 186 Rep Power: 13	Any Idea?!

February 3, 2013, 08:01		#5
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	it look likes a license issue.