CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Geometry tolerance (https://www.cfd-online.com/Forums/ansys-meshing/113183-geometry-tolerance.html)

DoubleG February 14, 2013 06:28

Geometry tolerance
 
1 Attachment(s)
Hi all,

I want to represent a spiral geometry, but for some reason ICEM doesn't (see attachment). Does anybody know where to set this tolerance?

Thanks in advance,
Gerrald

RodriguezFatz February 14, 2013 08:51

Try "Settings->Model->Topo Tolerance" and Triangulation Tolerance. At least for hexa meshes that worked for me...

diamondx February 14, 2013 09:01

this should not happen. look at how your sufaces looks , check the surface in the outline tree, disable wireframe mode


All times are GMT -4. The time now is 04:01.