|
[Sponsors] |
February 19, 2013, 04:19 |
Boundary Condition HELP
|
#1 |
Member
Bharat
Join Date: Jul 2011
Location: Delhi, India
Posts: 49
Rep Power: 14 |
hello
i am simulating conduction for a layup of 3 materials using gambit and fluent. the first material is split into 4 blocks. my concern is to apply wall boundary condition to the 3 vertical lines which splits the first material apart. i was specifying solid for all faces (taking 1st material as 4 different blocks), in continuum zone in gambit, while in fluent i am unable to get wall BC for the vertical lines.i tried different possibilities but did not helped. i'll be glad if someone help me with the possible manipulation, so that i can get wall BC for the vertical lines, with the condition that the 4 blocks are solid. thanks in advance.
__________________
chapter 3: -crossing the threshold- |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |
Setting outlet Pressure boundary condition using CAFFA code | Mukund Pondkule | Main CFD Forum | 0 | March 16, 2011 03:23 |
How exactly the "pressure outlet" bdry condition compute properties on the boundary? | yating9901 | FLUENT | 3 | June 28, 2010 12:26 |
How to set boundary condition in Fluent for the fo | Peiyong | FLUENT | 1 | November 10, 2006 11:44 |