CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] tutorial of non-newtonian transitional flow in an eccentric annulus (https://www.cfd-online.com/Forums/ansys-meshing/114109-tutorial-non-newtonian-transitional-flow-eccentric-annulus.html)

wemendibe March 5, 2013 11:03

tutorial of non-newtonian transitional flow in an eccentric annulus
 
I am doing one tutorial of fluent the title is "Non-Newtonian Transitional Flow in an Eccentric Annulus". I have define inner and outer as a wall in gambit but I when I define the periodic I don't know how to do it because I can not export it.
gambit give me this error (ERROR: Periodic Boundary Entities are not specified correctly. the two periodic entities must be link meshed and specified on the same boundary entity).
can someone help me?
thank you

asier March 5, 2013 13:25

Non-newtonian tutorial
 
I am doing the same tutorial as you, and I have the same problem.
If I get any solution I will tell you how I did it.

Far March 5, 2013 14:07

For this you must link the two faces. It is first icon from left in the second row of face mesh.

wemendibe March 6, 2013 07:29

Thank you very much, I have linked the two faces
I get the mesh but I can not make the same mesh as in the tutorial, if I use Hex for mesh it gives me error, I use the tet/hibrid mesh. I mesh the volume automatically is it right?

Thank you

wemendibe March 6, 2013 07:33

Thank you very much, I have linked the two faces
I get the mesh but I can not make the same mesh as in the tutorial, if I use Hex for mesh it gives me error, I use the tet/hibrid mesh. I mesh the volume automatically is it right?

Thank you


All times are GMT -4. The time now is 22:08.