CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Geometry Trouble

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 21, 2013, 10:02
Lightbulb Geometry Trouble
  #1
New Member
 
Emilio Sessa
Join Date: May 2013
Posts: 2
Rep Power: 0
Emilio is on a distinguished road
Hello everyboby,

I have a problem to submit that's making me waste a lot of time.
I have to mesh a simple 3D geometry costing of two solids: a brick with a cylinder inside that's tangent to its four sides. However when i use ICEM in interactive mode override, I can't manage well geometry. When trying to associate the two circles (curves) to the matching edges it tells me that no edges has been selected for association. Is it not for i should split circles or the lateral surface of the cylinder into two halves?

Please reply me!

Emilio
Emilio is offline   Reply With Quote

Reply

Tags
association, circles, icem 3d, split, split a surface

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
2D geometry to 3D geometry Sgonzalezg ANSYS Meshing & Geometry 11 April 8, 2011 12:02
[snappyHexMesh] Trouble with stl file: surface not closed (snappyHexMesh) sfalsharif OpenFOAM Meshing & Mesh Conversion 3 April 3, 2011 06:53
[GAMBIT] Trouble meshing complex VOF geometry RPJones ANSYS Meshing & Geometry 2 February 14, 2011 19:54
[snappyHexMesh] stl geometry trouble vaina74 OpenFOAM Meshing & Mesh Conversion 1 December 7, 2010 06:11


All times are GMT -4. The time now is 03:48.